Changes

Jump to: navigation, search

Fitlet Troubleshooting

7 bytes removed, 08:58, 20 July 2015
1. fitlet BIOS reset:
::a. *Power down the PC and unplug the power cable.::b. *Open the bottom cover (by unscrewing 4 bolts) and remove it.::c. *Reset the BIOS by pressing low profile push button (SW3) for 3 seconds located near the high mini PCIe slot, as shown in the picture below.::d. *Plug the power and power up the PC (either auto-on or pressing power button). ::*Note: [https://plus.google.com/+Fitpc-by-compulab/posts/ZFTD5xqMMqa fitlet disassembly video]
:: [[File:Fitlet_BIOS_reset.jpg]]
 
2. Check the RAM memory:
:: a. *Remove the top cover (refer to [http://fit-pc.com/download/fitlet/documents/fitlet-owners-manual.pdf fitlet Owner’s Manual]):: b. *Verify RAM module is installed and in place. The system will not boot without memory.:: c. *fitlet should be used with low power (1.35V) memory only.:: d. *Install the memory back. 
3. Power up without storage:
:: *Try to enter the BIOS by clicking ''Del'' during boot 
4. Power supply:
::a. *Verify the power supply is not damaged and functions properly.::b. *If you have another power supply use it to eliminate and determine the failing side.::c. *In case you use other power supply make sure it provides uninterrupted power and stable grounding.
5. [[fitlet: BIOS Update | fitlet BIOS Update]]
56. [http://www.fit-pc.com/web/support/rma/ RMA procedure]
[[category:fitlet]]
1,916
edits