Intense PC BIOS Update
Follow us on Twitter for software and BIOS updates
Contents
Step-By-Step Bios Update
Prepare Boot Media
1. Download BIOS file Intense PC BIOS ROM update image: IPC_2.2.400.5 old BIOS update
2. Extract the image file from the archive.
3. Prepare bootable USB flash drive:
- In Windows use Win32DiskImager tool
- In Linux do the following:
In order to figure out what the USB device name is, issue:
ls -all /dev/disk/by-id/
For instance, the device detected as /dev/sdx, issue:
sudo dd if=filename.img of=/dev/sdx bs=1MB
1st boot
1. Boot Intense PC or MintBox2 from the USB Flash drive.
2. As soon as the FreeDOS shows up, issue:
BIOS.bat
- The following warnings can be ignored:
3. Wait for it's completion without errors.
4. Reboot the device manually after you see the message "Verifying flash... VERIFIED".
2nd boot
1. Boot Intense PC or MintBox2 from the USB Flash drive.
2. As soon as the FreeDOS shows up, issue:
ME_LOCK.bat
3. Wait for it's completion without errors.
4. Wait until message "Please disconnect this system from power for 15 sec for completion"
5. Power cycle the computer.