Last modified on 20 June 2017, at 13:53

Intense PC (MintBox 2) security update 170523

  1. Download the latest Intense PC BIOS image:
  2. Extract the image file from the archive.
  3. Prepare bootable USB flash drive:
    • Windows users - use Win32DiskImager utility: Win32DiskImager
    • Linux users:
      • Run this command to figure out what device name was assigned to the USB drive: $ ls -all /dev/disk/by-id/
      • Assuming the USB drive was detected as /dev/sdx write the image on it by typing: $ sudo dd if=filename.img of=/dev/sdx bs=1MB
  4. Boot Intense PC or MintBox2 from the USB Flash drive.
  5. When boots up into FreeDOS command line run BIOS_UPD.bat and wait for it's completion without errors.
  6. After it the system will boot again into FreeDOS run ME_LOCK.bat and wait for it's completion without errors.
  7. Wait until message "Please disconnect this system from power for 15 sec for completion"
  8. Power cycle the computer.