Changes
# Extract the image file from the archive.
# Prepare bootable USB flash drive:
#* Windows users:#**Use - use Win32DiskImager utility: [https://sourceforge.net/projects/win32diskimager/ Win32DiskImager]
#* Linux users:
#** Run this command to figure out what device name was assigned to your USB flash drive#** : $ ls -all /dev/disk/by-id/#** Assuming your USB flash drive was detected as /dev/sdx write the image on it#** : $ sudo dd if=''filename.img'' of=/dev/sdx bs=1MB
# Boot Intense PC or MintBox2 from the USB Flash drive.
# When boots up into FreeDOS command line run ''BIOS_UPD.bat'' and wait for it's completion without errors.