Difference between revisions of "Intense PC (MintBox 2) security update 170523"

From fit-PC wiki
Jump to: navigation, search
(Created page with "# Download and save the attached archive: #* [http://fit-pc.com/download/intense-pc/bios/hotfix/ipc-security-update-170523/ipc_2.2.400.3.img.zip Update for Intense PC (MintBox...")   (change visibility)
 
Line 9: Line 9:
 
# Wait until message "Please disconnect this system from power for 15 sec for completion"
 
# Wait until message "Please disconnect this system from power for 15 sec for completion"
 
# Power cycle the computer.
 
# Power cycle the computer.
 +
 +
 +
[[category:Intense PC]]
 +
[[category:BIOS]]

Revision as of 09:28, 30 May 2017

  1. Download and save the attached archive:
  2. Extract the image file from the archive.
  3. Prepare bootable USB image:
  4. Boot Intense PC or MintBox2 from the USB Flash drive.
  5. When boots up into FreeDOS command line run BIOS_UPD.bat and wait for it's completion without errors.
  6. After it the system will boot again into FreeDOS run ME_LOCK.bat and wait for it's completion without errors.
  7. Wait until message "Please disconnect this system from power for 15 sec for completion"
  8. Power cycle the computer.