IPC2 Troubleshooting

From fit-PC wiki
Revision as of 08:59, 19 July 2015 by Maxim (Talk | contribs)

(change visibility) (diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

1. IPC2 BIOS reset:

  • Power down the PC and unplug the power cable.
  • Open the service door (by screwing out one bolt) and remove it (with the storage).
  • Reset the BIOS by pressing the low profile push button SW3 for 3 seconds.
  • Install back the storage with the service door.
  • Plug the power and power up the PC (either auto-on or pressing power button).
IPC2 BIOS reset.jpg

2. Verify RAM memory modules are installed -

  • The system will not boot without memory.

3. Try to answer the following questions:

  • Are you able to power up without storage?
  • IPC2 supports up to 7200 rpm HDD drives.

4. Power supply:

  • Verify the power supply is not damaged and functions properly.
  • If you have another power supply use it to eliminate and determine the failing side.
  • In case you use other power supply make sure it provides uninterrupted power and stable grounding.

5. IPC2 BIOS Update

6. RMA procedure