Difference between revisions of "IPC2 Troubleshooting"

From fit-PC wiki
Jump to: navigation, search
Line 27: Line 27:
  
 
5. [http://www.fit-pc.com/web/support/rma/ RMA procedure]
 
5. [http://www.fit-pc.com/web/support/rma/ RMA procedure]
 +
 +
[[category:IPC2]]

Revision as of 12:34, 6 April 2015

1. IPC2 BIOS reset:

a. Power down the PC and unplug the power cable.
b. Open the service door (by screwing out one bolt) and remove it (with the storage).
c. Reset the BIOS by pressing the low profile push button SW3 for 3 seconds.
d. Install back the storage with the service door.
e. Plug the power and power up the PC.


IPC2 BIOS reset.jpg


2. Verify RAM memory modules are installed -

The system will not boot without memory.


3. Try to answer the following questions:

a. Are you able to power up without storage?
b. IPC2 supports up to 7200 rpm HDD drives.


4. Power supply:

a. Verify the power supply is not damaged and functions properly.
b. If you have another power supply use it to eliminate and determine the failing side.
c. In case you use other power supply make sure it provides uninterrupted power and stable grounding.


5. RMA procedure