Difference between revisions of "IPC2 Broadwell BIOS update"
From fit-PC wiki
| Line 7: | Line 7: | ||
* Use Win32DiskImager utility for Windows: [https://sourceforge.net/projects/win32diskimager/ Win32DiskImager]<br> | * Use Win32DiskImager utility for Windows: [https://sourceforge.net/projects/win32diskimager/ Win32DiskImager]<br> | ||
4. Boot IPC2 Broadwell from the USB Flash.<br> | 4. Boot IPC2 Broadwell from the USB Flash.<br> | ||
| − | 5. When boots up into FreeDOS command line run: | + | 5. When boots up into FreeDOS command line, run one of the two options (based on FACE Module connected): |
* a. ''upd_usb.bat'' for systems with FM-USB3 face module and wait for it's completion.<br> | * a. ''upd_usb.bat'' for systems with FM-USB3 face module and wait for it's completion.<br> | ||
* b. ''upd_lan.bat'' for systems with other face modules and wait for it's completion.<br> | * b. ''upd_lan.bat'' for systems with other face modules and wait for it's completion.<br> | ||
Revision as of 07:47, 27 April 2017
The following procedure suitable IPC2 computers equipped with Intel Core gen 5 (Broadwell) processors.
BIOS update procedure
1. Download the latest image with IPC2 Broadwell BIOS ROM files
2. Extract the image file from archive.
3. Prepare bootable USB image:
- Use Win32DiskImager utility for Windows: Win32DiskImager
4. Boot IPC2 Broadwell from the USB Flash.
5. When boots up into FreeDOS command line, run one of the two options (based on FACE Module connected):
- a. upd_usb.bat for systems with FM-USB3 face module and wait for it's completion.
- b. upd_lan.bat for systems with other face modules and wait for it's completion.
6. Wait until message "Disconnect power connector for 15 sec and connect it again".
7. Power cycle the IPC2.
Note: "UEFI Boot", "CSM Support" and "Legacy Boot" options should be Enabled in BIOS setup: Main -> Boot Features
