Fitlet mSATA Heatplate Assembly

From fit-PC wiki
Revision as of 08:51, 27 December 2015 by Maxim (Talk | contribs)

(change visibility) (diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

mSATA heat-plate assembly instructions

Follow the steps shown below in order to attach mSATA heat plate to the mSATA SSD itself.

mSATA SSD attached to heat-plate:
1. mSATA SSD attached to heat-plate with a screw
2. Make sure that SATA controller face the heat-plate
3. Do not over-tighten the screw
Inside fitlet mSATA slot
1. Unscrew the M2 screw used to fasten mSATA to the bracket
2. Tighten mSATA to onboard stand-off with M2 screw
Back-panel assembly