Last modified on 27 December 2015, at 08:51

Fitlet mSATA Heatplate Assembly

mSATA heat-plate assembly instructions

Follow the steps shown below in order to attach mSATA heat plate to the mSATA SSD itself.

mSATA SSD attached to heat-plate:
1. mSATA SSD attached to heat-plate with a screw
2. Make sure that SATA controller face the heat-plate
3. Do not over-tighten the screw
Inside fitlet mSATA slot
1. Unscrew the M2 screw used to fasten mSATA to the bracket
2. Tighten mSATA to onboard stand-off with M2 screw
Back-panel assembly