Difference between revisions of "Fitlet mSATA Heatplate Assembly"

From fit-PC wiki
Jump to: navigation, search
 
Line 9: Line 9:
 
[[File:MSATA heatplate assembly 2.jpg|700px|thumb|left|Inside fitlet mSATA slot<br> ]]  
 
[[File:MSATA heatplate assembly 2.jpg|700px|thumb|left|Inside fitlet mSATA slot<br> ]]  
  
[[File:MSATA heatplate assembly 3.jpg|700px|thumb|left|Tighten mSATA to onboard stand-off with M2 screw<br>]]  
+
[[File:MSATA heatplate assembly 3.jpg|700px|thumb|left|1. Unscrew the M2 screw used to fasten mSATA to the bracket<br> 2. Tighten mSATA to onboard stand-off with M2 screw<br>]]  
  
 
[[File:MSATA heatplate assembly 4.jpg|700px|thumb|left|Back-panel assembly]]
 
[[File:MSATA heatplate assembly 4.jpg|700px|thumb|left|Back-panel assembly]]

Latest revision as of 08:51, 27 December 2015

mSATA heat-plate assembly instructions

Follow the steps shown below in order to attach mSATA heat plate to the mSATA SSD itself.

mSATA SSD attached to heat-plate:
1. mSATA SSD attached to heat-plate with a screw
2. Make sure that SATA controller face the heat-plate
3. Do not over-tighten the screw
Inside fitlet mSATA slot
1. Unscrew the M2 screw used to fasten mSATA to the bracket
2. Tighten mSATA to onboard stand-off with M2 screw
Back-panel assembly