Difference between revisions of "Fitlet mSATA Heatplate Assembly"

From fit-PC wiki
Jump to: navigation, search
(Created page with "== mSATA heat-plate assembly instructions == Follow the steps shown below in order to attach the mSATA heat plate to the mSATA SSD itself. File:MSATA heatplate assembly 1.j...")   (change visibility)
 
Line 1: Line 1:
 
== mSATA heat-plate assembly instructions ==
 
== mSATA heat-plate assembly instructions ==
Follow the steps shown below in order to attach the mSATA heat plate to the mSATA SSD itself.
+
Follow the steps shown below in order to attach mSATA heat plate to the mSATA SSD itself.
  
 
[[File:MSATA heatplate assembly 1.jpg|700px|thumb|left|mSATA SSD attached to heat-plate:<br>
 
[[File:MSATA heatplate assembly 1.jpg|700px|thumb|left|mSATA SSD attached to heat-plate:<br>

Revision as of 11:37, 3 November 2015

mSATA heat-plate assembly instructions

Follow the steps shown below in order to attach mSATA heat plate to the mSATA SSD itself.

mSATA SSD attached to heat-plate:
1. mSATA SSD attached to heat-plate with a screw
2. Make sure that SATA controller face the heat-plate
3. Do not over-tighten the screw
Inside fitlet mSATA slot
Tighten mSATA to onboard stand-off with M2 screw
Back-panel assembly