Fitlet: BIOS Update

Follow us on Twitter for software and BIOS updates

Important:

* BIOS update recommended in case the system is unstable, or required fixes have been released.
* Incorrect BIOS update has a risk for system brick, therefore follow the guide step-by-step.

1. Format the USB Flash Device (UFD) to FAT32 file system
2. Download and extract the BIOS Updater Package
   The package contains the following files:

   AfuEfix64.efi

   Flash.nsh

   Shellx64.efi

   Startup.nsh

3. Copy the extracted files to the UFD
4. Download and extract the fitlet BIOS file
5. Copy the BIOS file to the UFD
6. Connect the UFD to the target unit and power up
7. Press the DEL key during the boot until the BIOS Setup appears
8. Browse to the Save & Exit menu
9. Click on the Launch EFI Shell from filesystem device option
10. The system will boot to the EFI Shell, and after 4 seconds the automatic flash process will start.
    Note: At the start of the process, the system will hang for 1 minute. This is expected behaviour. Please, don’t interrupt it
11. At the end of the flashing process, remove the UFD, type the command reset and press the Enter key