Changes

Jump to: navigation, search

Fitlet2 Troubleshooting

1,423 bytes removed, 08:18, 17 May 2020
/* 4. fitlet2 BIOS reset */
===4. fitlet2 BIOS reset===
*For Reset BIOS version FLT2default following the following procedure for [[Fitlet2: Revision Notes#fitlet2 Rev 1.02 | fitlet2 revisions 1.40.01.00 and above.*In cases BIOS version is older, you may also try to reset BIOS blindly - Please expand the below:<div class="toccolours mw-collapsible mw-collapsed" overflow:auto;">Please disconnect the power core and perform the following2]]:
1. Remove all the storage devices (internal and external). 2. Boot the system and wait for ~15 seconds to ensure the system booted to the BIOS menu. 3. Press F3 key and after that the Enter key to load the default menu settings 4. Press F4 key and after that the Enter key to save and exit 5. The system should restart and boot with default menu settings. </div>  Reset BIOS default following the following procedure for [[SBC Product LineFile: fitlet2-HBPN| SBC revisions 1Fitlet2_rtc_rst.1png]]:<div class="toccolours mw-collapsible mw-collapsed" overflow:auto;">
#Unplug power cable from the fitlet2
#Remove the 4x Phillips Chassis screws
#Remove bottom and top cover
#Remove the RAM stick
#Plug in power cable (should turn on automatically), and Wait ~10 seconds
#Unplug power cable
#Assemble back the RAM stick
#Carefully unplug the RTC Battery from the 2pin connector
#Plug power cable (should turn on automatically)
#Shutdown the PC
#Unplug the power cable
#Plug the RTC Battery back in
#Plug Power cable
 
At this stage the BIOS settings should be reset to defaults.
</div>
Reset BIOS default following the following procedure for [[SBC Product Line: fitlet2-HBPN| SBC revisions 1.2]]:
<div class="toccolours mw-collapsible mw-collapsed" overflow:auto;">
#Unplug power cable from the fitlet2
#Remove the 4x Phillips Chassis screws
#Assemble back the RAM stick
#Press the RTC reset button.
[[File:Fitlet2_rtc_rst.png]] 9. #Plug power cable (should be automatically turned on)
At this stage the BIOS settings should be reset to defaults.</div>
== I don't have any display output, there's nothing on the screen ==