Changes

Jump to: navigation, search

Fitlet2 Troubleshooting

106 bytes added, 13:11, 27 March 2019
/* 4. fitlet2 BIOS reset */
#Unplug power cable from the fitlet2
#Remove the 4x Phillips Chassis screws
#Remove and bottom and top cover
#Remove the RAM stick
#Plug in power cable (should turn on automatically)- ~ , and Wait ~10 seconds
#Unplug power cable
#Assemble back the RAM stick
9. Plug power cable (should be automatically turned on)
#Otherwise <div class="toccolours mw-collapsible mw-collapsed" overflow:auto;">'''if the fitlet2 SBC Revision is 1.1, skip step 9 above and expand the below:''' carefully unplug the RTC Battery from the 2pin connector.
#Plug power cable (should turn on automatically)
#Continue steps for revision 1.1 (RTC battery had to be disconnected):
##Plug the RTC Battery back in
##Plug Power cable
</div>
At this stage the BIOS settings should be reset to defaults.
1,586
edits