Last modified on 24 August 2023, at 07:07

Difference between revisions of "Fitlet2 FACET Cards"

(FC-SCG)   (change visibility)
 
(28 intermediate revisions by 2 users not shown)
Line 4: Line 4:
 
* FACET-Card standard is open to allow 3rd parties to design their own application specific FACET-Cards
 
* FACET-Card standard is open to allow 3rd parties to design their own application specific FACET-Cards
 
* The full production files of each Compulab FACET-Card are published below to allow 3rd parties to modify for their needs
 
* The full production files of each Compulab FACET-Card are published below to allow 3rd parties to modify for their needs
 +
==fitlet2 FACET-Card Types==
 +
* [[FC-CEM FACET Card | '''FC-CEM''']] (''M.2 E-Key (usually used for Wi-Fi) + M.2 B-Key (for M.2 cellular modem) + M.2 M-Key (for SATA SSD)'') '''Wide FACET-card'''
 +
* [[FC-M2LAN FACET Card | '''FC-M2LAN''']] (''2x Gbit Ethernet'') '''Narrow FACET-card'''
 +
* [[FC-OPLN FACET Card | '''FC-OPLN''']] (''M.2 E-Key (usually used for Wi-Fi) + M.2 M-Key (for SATA SSD) + GbE SFP+'') '''Wide FACET-card'''
 +
* [[FC-PCI FACET Card | '''FC-PCI''']] (''M.2 E-Key (usually used for Wi-Fi) + M.2 M-Key (for SATA SSD) + miniPCIe + SIM'') '''Wide FACET-card'''
 +
* [[FC-POED FACET Card | '''FC-POED''']] (''1xPoE + M.2 E-Key (usually used for Wi-Fi) + M.2 M-Key (for SATA SSD)'') '''Wide FACET-card'''
 +
* [[FC-SCG FACET Card | '''FC-SCG''']] (''CANbus + RS232/RS485 + GPIOs + M.2 E-Key (usually used for Wi-Fi)'') '''Narrow FACET-card'''
 +
* [[FC-USB FACET Card | '''FC-USB''']] (''4x USB2 + M.2 E-Key (usually used for Wi-Fi)'') '''Narrow FACET-card'''
  
 
==Custom FACET-Card design resources==
 
==Custom FACET-Card design resources==
 
===Mechanical constraints===
 
===Mechanical constraints===
 
There are two form-factors of FACET-Cards
 
There are two form-factors of FACET-Cards
 +
{| class="wikitable" border="1"
 +
| [[File:Narrow_FACET.png|170px|thumb|'''Narrow FACET-Card''']]
 +
| [[File:Wide_FACET.png|215px|thumb|'''Wide FACET-Card''']]
 +
|}
 +
 
* Narrow occupies the M.2 E-Key slot (leaving the SATA slot native)
 
* Narrow occupies the M.2 E-Key slot (leaving the SATA slot native)
* Wide FACET-Card occupies both M.2 slot (usually requiring SATA slot on the FACET itself)
+
* Wide FACET-Card occupies both M.2 slot (usually requiring SATA slot on the FACET itself) <!--
 
====Narrow FACET-Card mechanical constraints====
 
====Narrow FACET-Card mechanical constraints====
 
* [https://fit-iot.com/files/mechanical/FACETS/narrow-facet-card-envelope.x_t Narrow FACET-Card envelope (x_t)]
 
* [https://fit-iot.com/files/mechanical/FACETS/narrow-facet-card-envelope.x_t Narrow FACET-Card envelope (x_t)]
 
* [https://fit-iot.com/files/mechanical/FACETS/narrow-facet-card-envelope.DXF Narrow FACET-Card envelope (DXF]
 
* [https://fit-iot.com/files/mechanical/FACETS/narrow-facet-card-envelope.DXF Narrow FACET-Card envelope (DXF]
* [https://fit-iot.com/files/mechanical/FACETS/narrow-facet-card-envelope.pdf Narrow FACET-Card envelope (PDF)]
+
* [https://fit-iot.com/files/mechanical/FACETS/narrow-facet-card-envelope.pdf Narrow FACET-Card envelope (PDF)]-->
  
 
====Wide FACET-Card mechanical constraints====
 
====Wide FACET-Card mechanical constraints====
* [https://fit-iot.com/files/mechanical/FACETS/FACET-wide-type-envelope.x_t wide FACET-Card envelope (x_t)]
+
* [https://fit-iot.com/files/mechanical/FACETS/FACET_wide-type_envelope_APL1.4UP.x_t wide FACET-Card envelope (x_t)]
* [https://fit-iot.com/files/mechanical/FACETS/FITLET2-FACET-wide-type-envelope.DXF wide FACET-Card envelope (DXF)]
+
* [https://fit-iot.com/files/mechanical/FACETS/FACET_wide-type_envelope_APL1.4UP.DXF wide FACET-Card envelope (DXF)]
* [https://fit-iot.com/files/mechanical/FACETS/FITLET2-FACET-wide-type-envelope.PDF wide FACET-Card envelope (PDF)]
+
* [https://fit-iot.com/files/mechanical/FACETS/FACET_wide-type_envelope_APL1.4UP.PDF wide FACET-Card envelope (PDF)]
 
+
* [https://fit-iot.com/files/mechanical/FACETS/FACET_wide-type_envelope_APL1.4UP.STEP wide FACET-Card envelope (STEP)]
===FACET-Card pinout===
+
 
+
[[FC-PCI fitlet2 FACET Pinout description table]]
+
 
+
==FC-PCI==
+
 
+
* Type: [[Wide FACET Card]]
+
* Features:
+
** M.2 E-Key socket (usually used for Wi-Fi)
+
** miniPCIe socket (for miniPCIe adapters) + SIM socket (for miniPCIe cellular modem)
+
** M.2 M-Key socket 2260 | 2280 for SATA SSD
+
<br>
+
[[File:fc-pci-top.jpg|200px]]
+
[[File:fc-pci-bottom.jpg|200px|middle]]
+
 
+
===Specifications===
+
* M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
+
* M.2 Key-E: 2230 (usually used for WiFi & BT module)
+
* Mini PCI connector - usually used for Cell modem module
+
* Micro-SIM card socket
+
 
+
===Instructions===
+
* [[fitlet2 FC-PCI installation instructions]]
+
 
+
===Hardware===
+
* [[FC-PCI Pinout description table]]
+
 
+
===Production files===
+
 
+
*Schematics
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Schematics/FC-PCI-REV-1.0-schematics.pdf FC-PCI Schematics]
+
*Assembly
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Assembly/FC-PCI-1_1-Assembly.zip FC-PCI Rev1.1 Assembly files]
+
*Layout
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Layout/FC-PCI-1_1-Layout.zip FC-PCI Rev1.1 Layout files]
+
*Mechanical
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Mechanical/FC-PCI-PCB.DXF FC-PCI Mechanical - DXF]<br>
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Mechanical/FC-PCI-PCB.PDF FC-PCI Mechanical - PDF]
+
 
+
==FC-CEM==
+
* Type: [[Wide FACET Card]]
+
* Features:
+
** M.2 E-Key socket (usually used for Wi-Fi)
+
** M.2 B-Key socket + SIM socket (for M.2 cellular modem)
+
** M.2 M-Key socket 2260 | 2280 for SATA SSD
+
<br>
+
[[File:FC-CEM-top.jpg|200px]]
+
[[File:FC-CEM-bottom.jpg|200px|middle]]
+
 
+
===Specifications===
+
* M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
+
* M.2 Key-E: 2230 (usually used for WiFi & BT module)
+
* M.2 Key-B: 2230 - usually used for Cell modem module
+
* Micro-SIM card socket
+
 
+
===Instructions===
+
* [[fitlet2 FC-CEM installation instructions]]
+
 
+
===Production files===
+
 
+
*Schematics
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Schematics/FC-CEM-1_0-Schematic.zip FC-CEM Rev1.0 Schematic files]
+
 
+
*Assembly
+
**[https://fit-iot.com/files//mechanical/FACETS/FC-CEM/Assembly/FC-CEM-1_0-Assembly.zip FC-CEM Rev1.0 Assembly files]
+
 
+
*Layout
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Layout/FC-CEM-1_0-Layout.zip FC-CEM Rev1.0 Layout files]
+
 
+
*Mechanical
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Mechanical/FC-CEM.DXF FC-PCI Mechanical - DXF]<br>
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Mechanical/FC-CEM.PDF FC-PCI Mechanical - PDF]
+
 
+
 
+
 
+
==FC-USB==
+
* Type: [[Narrow FACET Card]]
+
* Features:
+
** 4x USB2 ports (type A)
+
 
+
fitlet2 with FC-USB has 8 USB ports (2x USB3 + 6x USB2), all type-A connectors
+
<br>
+
[[File:fc-usb-top.jpg|200px]]
+
[[File:fc-usb-bottom.jpg|200px|middle]]
+
 
+
===Specifications===
+
* Downstream ports compatible with HS (480Mb), FS (12Mb) and LS (1.5Mb)
+
* The USB port supports in single transaction translator (TT)
+
* port current limit - Up to 0.5A
+
 
+
===Instructions===
+
* [[fitlet2 FC-USB installation instructions]]
+
 
+
===Production files===
+
*Schematics
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Schematics/FC-USB-1_1-Schematics.zip FC-USB Rev1.1 Schematic files]
+
 
+
*Assembly
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Assembly/FC-USB-1_1-Assembly.zip FC-USB Rev1.1 Assembly files]
+
 
+
*Layout
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Layout/FC-USB-1_1-Layout.ZIP FC-USB Rev1.1 Layout files]
+
 
+
*Mechanical
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Mechanical/FC-USB-v1.0-bottom.dxf FC-USB Mech Bottom]
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Mechanical/FC-USB-v1.0-top.dxf FC-USB Mech Top]
+
 
+
 
+
 
+
==FC-M2LAN==
+
* Type: [[Narrow FACET Card]]
+
* Features:
+
** 2x Gbit Ethernet ports (Intel i211)
+
 
+
FC-M2LAN adds dual Gbit Ethernet ports to fitlet2 for a total of 4 ports.
+
<br>
+
 
+
===Specifications===
+
* provided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
+
* M.2 Key-E: 2230 (usually used for WiFi & BT module)
+
* Ethernet controllers: Intel I211IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)
+
**  PCIe interface: PCIe v2.1 (2.5 GT/s) x1
+
** Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)
+
** Proxy: ECMA-393 and Windows logo for proxy offload
+
** Jumbo frames
+
** Interrupt moderation, VLAN support, IP checksum offload
+
** RSS and MSI-X to lower CPU utilization in multi-core systems
+
** Advanced cable diagnostics, auto MDI-X
+
** ECC – error correcting memory in packet buffers
+
** Four Software Definable Pins (SDPs)
+
** Right (DS1) green LED: ON - Link, Blink - Link and activity
+
** Left (DS2) green LED: ON - 100 Mbps link
+
** Left (DS2) orange LED: ON - 1000 Mbps link.
+
 
+
 
+
[[File:FC-M2LAN-top.jpg|200px]]
+
[[File:FC-M2LAN-bottom.jpg|200px|middle]]
+
 
+
===Instructions===
+
*[[Fitlet2 FC-M2LAN installation instructions]]
+
 
+
===Production files===
+
*Schematics
+
**[http://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Schematics/FC-M2LAN-1_0-Schematics.rar FC-M2LAN Rev1.0 Schematic files]
+
 
+
*Assembly
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Assembly/FC-M2LAN-1_0-Assembly.rar FC-M2LAN Rev1.0 Assembly files]
+
 
+
*Layout
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Layout/FC-M2LAN-1_0-Layout.zip FC-M2LAN Rev1.0 Layout files]
+
 
+
*Mechanical
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Mechanical/FC-M2LAN-TOP.dxf FC-M2LAN Mechanical Top]
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Mechanical/FC-M2LAN-bottom.dxf FC-M2LAN mechaical Bottom]
+
 
+
 
+
 
+
==FC-SCG==
+
* Type: [[Narrow FACET Card]]
+
* Features:
+
** CANbus
+
** RS232/RS485
+
** GPIOs
+
Includes the following socket:
+
* M.2 E-key 2230 (usually used for WiFi adapter)
+
<br>
+
[[File:fc-scg-top.jpg|200px]]
+
[[File:fc-scg-bottom.jpg|200px|middle]]
+
 
+
===Specifications===
+
* TBD
+
 
+
===Instructions===
+
* [[Fitlet2 FC-SCG installation instructions]]
+
 
+
===Hardware===
+
* [[FSCG RS232/RS484 pinout table]]
+
 
+
===Application notes===
+
* [[Application note - CANbus on fitlet2 with FC-SCG running Linux]]
+
* [[Application note - GPIO on fitlet2 with FC-SCG running Linux]]
+
Note: GPIO Works as a GPIO extender only. Does not work as an IRQ Extender
+
 
+
Note: GPIO and CANbus cannot work simultaneously
+
 
+
===Production files===
+
 
+
*Schematics
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Schematics/FC-SCG-1_0-Schematics.zip FC-SCG Rev1.0 Schematic files]
+
 
+
*Assembly
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Assembly/FC-SCG-1_0-Assembly.zip FC-SCG Rev1.0 Assembly files]
+
 
+
*Layout
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Layout/FC-SCG-1_0-Layout.zip FC-SCG Rev1.0 Layout files]
+
 
+
Mechanical
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-CS.dxf FC-SCG Mech Component side]
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-PS.dxf FC-SCG Mech Print side]
+
 
+
==FC-POED==
+
* Type: [[Wide FACET Card]]
+
* Features:
+
** 802.3af/802.3at compliant PoE device port with Gbit Ethernet (Intel i211)
+
** M.2 E-Key socket (usually used for Wi-Fi)
+
** M.2 M-Key socket 2260 | 2280 for SATA SSD
+
 
+
FC-POED allows powering fitlet2 from a POE source while providing a 3rd Gbit Ethernet port.
+
<br>
+
[[File:fc-poed-top-front.jpg|200px]]
+
[[File:fc-poed-bottom-front.jpg|200px|middle]]
+
 
+
===Specifications===
+
* provided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
+
* M.2 Key-E: 2230 (usually used for WiFi & BT module)
+
* Ethernet controllers: Intel I211IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)
+
** PCIe interface: PCIe v2.1 (2.5 GT/s) x1
+
** Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)
+
** Proxy: ECMA-393 and Windows logo for proxy offload
+
** Jumbo frames
+
** Interrupt moderation, VLAN support, IP checksum offload
+
** RSS and MSI-X to lower CPU utilization in multi-core systems
+
** Advanced cable diagnostics, auto MDI-X
+
** ECC – error correcting memory in packet buffers
+
** Four Software Definable Pins (SDPs)
+
** Right (DS1) green LED: ON - Link, Blink - Link and activity
+
** Left (DS2) green LED: ON - 100 Mbps link
+
** Left (DS2) orange LED: ON - 1000 Mbps link.
+
** IEEE 802.3 at PD Solution Interface controller supported includes Detection Hardware Classification
+
* Inrush current limit (200-mA) during startup
+
* Enhanced features includes automatic Maintain Power Signature (MPS)
+
 
+
===Instructions===
+
* [[fitlet2 FC-POED installation instructions]]
+
 
+
===Production files===
+
*Schematics
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Schematics/FC-POED-1_1-Schematics.rar FC-POED Rev1.0 Schematic files]
+
 
+
*Assembly
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Assembly/FC-POED-1_0Assembly.zip FC-POED Rev1.0 Assembly files]
+
 
+
*Layout
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Layout/FC-POED-1_0-Layout.zip FC-POED Rev1.0 Layout files]
+
 
+
*Mechanical
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Mechanical/FC-POE-bottom.dxf FC-POED Mech Bottom]
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Mechanical/FC-POE-top.dxf FC-POED Mech Top]
+
 
+
==FC-OPLN==
+
* Type: [[Wide FACET Card]]
+
* Features:
+
** M.2 E-Key socket (usually used for Wi-Fi)
+
** M.2 M-Key socket 2260 | 2280 for SATA SSD
+
** SFP+ socket for optical GbE connection.
+
<br>
+
[[File:fc-opln-bottom.jpg|200px|middle]]
+
[[File:fc-opln-top.jpg|200px]]
+
 
+
===Specifications===
+
* Supported 1Gbps SFP/SFP+ transceiver
+
* LEDs: LAN SFP link/activity indication:
+
** Right (DS1) green LED: ON - Link, Blink - Link and activity
+
** Left (DS2) green LED: ON - 100 Mbps link
+
** Left (DS2) orange LED: ON - 1000 Mbps link.
+
* provided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
+
** M.2 Key-E: 2230 (usually used for WiFi & BT module)
+
* Ethernet controller: Intel I210IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)
+
** PCIe interface: PCIe v2.1 (2.5 GT/s) x1
+
** Integrated Non-Volatile Memory
+
** Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)
+
*** Proxy: ECMA-393 and Windows logo for proxy offload
+
** Audio-video bridging: IEEE 1588/802.1AS precision time synchronization
+
*** IEEE 802.1Qav traffic shaper (with software extensions)
+
** Jumbo frames
+
** Interrupt moderation, VLAN support, IP checksum offload
+
** RSS and MSI-X to lower CPU utilization in multi-core systems
+
** Advanced cable diagnostics, auto MDI-X
+
** ECC – error correcting memory in packet buffers
+
 
+
===Instructions===
+
* [[Fitlet2 FC-OPLN installation instructions]]
+
 
+
===Production files===
+
*Schematics
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Schematics/FC-OPLN-1_0-Schematics.zip FC-OPLN Rev1.0 Schematic files]
+
 
+
*Assembly
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Assembly/FC-OPLN-1_0-Assembly.zip FC-OPLN Rev1.0 Assembly files]
+
 
+
*Layout
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Layout/FC-OPLN-1_0-Layout.zip FC-OPLN Rev1.0 Layout files]
+
 
+
*Mechanical
+
**[http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC_OPLN.dxf FC-OPLEN Mech Top]
+
**[http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC_OPLN-Bottom.dxf FC-OPLN Mech bottom]
+
**[http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC-OPLN_asm.STP FC-OPLN 3D .STP file]
+
**[http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC-OPLN_asm.x_t FC-OPLN 3D .x_t file]
+
  
 +
====Narrow FACET-Card mechanical constraints - FC-M2LAN ====
 +
* [https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/M2LAN_FACET_envelope_APL1.4UP.STEP Narrow FACET-Card envelope (STEP)]
 +
* [https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/M2LAN_FACET_envelope_APL_1.4UP.DXF Narrow FACET-Card envelope (DXF)]
 +
* [https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/M2LAN_FACET_envelope_APL_1.4UP.PDF Narrow FACET-Card envelope (PDF)]
 +
* [https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/M2LAN_FACET_envelope_APL_1.4UP.x_t Narrow FACET-Card envelope (x_t)]
  
  
 
[[category:fitlet2]]
 
[[category:fitlet2]]
 
[[category:Extension boards]]
 
[[category:Extension boards]]

Latest revision as of 07:07, 24 August 2023

  • This page provides technical information about fitlet2 FACET-Cards.
  • FACET-Cards extend fitlet2 functionality and I/O.
  • FACET-Card stands for Function And Connectivity Extension T-Card
  • FACET-Card standard is open to allow 3rd parties to design their own application specific FACET-Cards
  • The full production files of each Compulab FACET-Card are published below to allow 3rd parties to modify for their needs

fitlet2 FACET-Card Types

  • FC-CEM (M.2 E-Key (usually used for Wi-Fi) + M.2 B-Key (for M.2 cellular modem) + M.2 M-Key (for SATA SSD)) Wide FACET-card
  • FC-M2LAN (2x Gbit Ethernet) Narrow FACET-card
  • FC-OPLN (M.2 E-Key (usually used for Wi-Fi) + M.2 M-Key (for SATA SSD) + GbE SFP+) Wide FACET-card
  • FC-PCI (M.2 E-Key (usually used for Wi-Fi) + M.2 M-Key (for SATA SSD) + miniPCIe + SIM) Wide FACET-card
  • FC-POED (1xPoE + M.2 E-Key (usually used for Wi-Fi) + M.2 M-Key (for SATA SSD)) Wide FACET-card
  • FC-SCG (CANbus + RS232/RS485 + GPIOs + M.2 E-Key (usually used for Wi-Fi)) Narrow FACET-card
  • FC-USB (4x USB2 + M.2 E-Key (usually used for Wi-Fi)) Narrow FACET-card

Custom FACET-Card design resources

Mechanical constraints

There are two form-factors of FACET-Cards

Narrow FACET-Card
Wide FACET-Card
  • Narrow occupies the M.2 E-Key slot (leaving the SATA slot native)
  • Wide FACET-Card occupies both M.2 slot (usually requiring SATA slot on the FACET itself)

Wide FACET-Card mechanical constraints

Narrow FACET-Card mechanical constraints - FC-M2LAN