Difference between revisions of "Fitlet2 FACET Cards"

From fit-PC wiki
Jump to: navigation, search
(Instructions)   (change visibility)
(Production files)   (change visibility)
 
(19 intermediate revisions by 3 users not shown)
Line 36: Line 36:
  
 
===Specifications===
 
===Specifications===
* TBD
+
* M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
 +
* M.2 Key-E: 2230 (usually used for WiFi & BT module)
 +
* Mini PCI connector - usually used for Cell modem module
 +
* Micro-SIM card socket
  
 
===Instructions===
 
===Instructions===
Line 67: Line 70:
  
 
===Specifications===
 
===Specifications===
* TBD
+
* M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
 +
* M.2 Key-E: 2230 (usually used for WiFi & BT module)
 +
* M.2 Key-B: 3042 (usually used for Cell modem module)
 +
* Micro-SIM card socket
  
 
===Instructions===
 
===Instructions===
Line 84: Line 90:
  
 
*Mechanical
 
*Mechanical
**[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Mechanical/FC-CEM.DXF FC-PCI Mechanical - DXF]<br>
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Mechanical/FC-CEM.DXF FC-CEM Mechanical - DXF]<br>
**[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Mechanical/FC-CEM.PDF FC-PCI Mechanical - PDF]
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Mechanical/FC-CEM.PDF FC-CEM Mechanical - PDF]
 
+
 
+
  
 
==FC-USB==
 
==FC-USB==
Line 100: Line 104:
  
 
===Specifications===
 
===Specifications===
* TBD
+
* Downstream ports compatible with HS (480Mb), FS (12Mb) and LS (1.5Mb)
 +
* The USB port supports in single transaction translator (TT)
 +
* port current limit - Up to 0.5A
  
 
===Instructions===
 
===Instructions===
Line 130: Line 136:
  
 
===Specifications===
 
===Specifications===
* TBD
+
* Ethernet controllers: Intel I211IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)
 +
**  PCIe interface: PCIe v2.1 (2.5 GT/s) x1
 +
** Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)
 +
** Proxy: ECMA-393 and Windows logo for proxy offload
 +
** Jumbo frames
 +
** Interrupt moderation, VLAN support, IP checksum offload
 +
** RSS and MSI-X to lower CPU utilization in multi-core systems
 +
** Advanced cable diagnostics, auto MDI-X
 +
** ECC – error correcting memory in packet buffers
 +
** Four Software Definable Pins (SDPs)
 +
** Right (DS1) green LED: ON - Link, Blink - Link and activity
 +
** Left (DS2) green LED: ON - 100 Mbps link
 +
** Left (DS2) orange LED: ON - 1000 Mbps link.
 +
 
  
 
[[File:FC-M2LAN-top.jpg|200px]]
 
[[File:FC-M2LAN-top.jpg|200px]]
Line 151: Line 170:
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Mechanical/FC-M2LAN-TOP.dxf FC-M2LAN Mechanical Top]
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Mechanical/FC-M2LAN-TOP.dxf FC-M2LAN Mechanical Top]
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Mechanical/FC-M2LAN-bottom.dxf FC-M2LAN mechaical Bottom]
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Mechanical/FC-M2LAN-bottom.dxf FC-M2LAN mechaical Bottom]
 
 
  
 
==FC-SCG==
 
==FC-SCG==
Line 165: Line 182:
 
[[File:fc-scg-top.jpg|200px]]
 
[[File:fc-scg-top.jpg|200px]]
 
[[File:fc-scg-bottom.jpg|200px|middle]]
 
[[File:fc-scg-bottom.jpg|200px|middle]]
 
===Specifications===
 
* TBD
 
  
 
===Instructions===
 
===Instructions===
* [Fitlet2 FC-SCG installation instructions]
+
* [[Fitlet2 FC-SCG installation instructions]]
 +
 
 +
===Hardware===
 +
* [[FSCG RS232/RS485 pinout table]]
  
 
===Application notes===
 
===Application notes===
Line 197: Line 214:
 
* Type: [[Wide FACET Card]]
 
* Type: [[Wide FACET Card]]
 
* Features:
 
* Features:
** 802.3af compliant PoE device port with Gbit Ethernet (Intel i211)
+
** 802.3af/802.3at compliant PoE device port with Gbit Ethernet (Intel i211)
 
** M.2 E-Key socket (usually used for Wi-Fi)
 
** M.2 E-Key socket (usually used for Wi-Fi)
 
** M.2 M-Key socket 2260 | 2280 for SATA SSD
 
** M.2 M-Key socket 2260 | 2280 for SATA SSD
Line 207: Line 224:
  
 
===Specifications===
 
===Specifications===
* TBD
+
* provided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
 +
* M.2 Key-E: 2230 (usually used for WiFi & BT module)
 +
* Ethernet controllers: Intel I211IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)
 +
** PCIe interface: PCIe v2.1 (2.5 GT/s) x1
 +
** Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)
 +
** Proxy: ECMA-393 and Windows logo for proxy offload
 +
** Jumbo frames
 +
** Interrupt moderation, VLAN support, IP checksum offload
 +
** RSS and MSI-X to lower CPU utilization in multi-core systems
 +
** Advanced cable diagnostics, auto MDI-X
 +
** ECC – error correcting memory in packet buffers
 +
** Four Software Definable Pins (SDPs)
 +
** Right (DS1) green LED: ON - Link, Blink - Link and activity
 +
** Left (DS2) green LED: ON - 100 Mbps link
 +
** Left (DS2) orange LED: ON - 1000 Mbps link.
 +
** IEEE 802.3 at PD Solution Interface controller supported includes Detection Hardware Classification
 +
* Inrush current limit (200-mA) during startup
 +
* Enhanced features includes automatic Maintain Power Signature (MPS)
  
 
===Instructions===
 
===Instructions===
Line 214: Line 248:
 
===Production files===
 
===Production files===
 
*Schematics
 
*Schematics
**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Schematics/FC-POED-1_0-Schematics.rar FC-POED Rev1.0 Schematic files]
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Schematics/FC-POED-1_1-Schematics.rar FC-POED Rev1.0 Schematic files]
  
 
*Assembly
 
*Assembly
Line 225: Line 259:
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Mechanical/FC-POE-bottom.dxf FC-POED Mech Bottom]
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Mechanical/FC-POE-bottom.dxf FC-POED Mech Bottom]
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Mechanical/FC-POE-top.dxf FC-POED Mech Top]
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Mechanical/FC-POE-top.dxf FC-POED Mech Top]
 
 
  
 
==FC-OPLN==
 
==FC-OPLN==
Line 260: Line 292:
  
 
===Instructions===
 
===Instructions===
* TBD
+
* [[Fitlet2 FC-OPLN installation instructions]]
  
 
===Production files===
 
===Production files===

Latest revision as of 10:54, 1 July 2020

  • This page provides technical information about fitlet2 FACET-Cards.
  • FACET-Cards extend fitlet2 functionality and I/O.
  • FACET-Card stands for Function And Connectivity Extension T-Card
  • FACET-Card standard is open to allow 3rd parties to design their own application specific FACET-Cards
  • The full production files of each Compulab FACET-Card are published below to allow 3rd parties to modify for their needs

Custom FACET-Card design resources

Mechanical constraints

There are two form-factors of FACET-Cards

  • Narrow occupies the M.2 E-Key slot (leaving the SATA slot native)
  • Wide FACET-Card occupies both M.2 slot (usually requiring SATA slot on the FACET itself)

Narrow FACET-Card mechanical constraints

Wide FACET-Card mechanical constraints

FACET-Card pinout

FC-PCI fitlet2 FACET Pinout description table

FC-PCI

  • Type: Wide FACET Card
  • Features:
    • M.2 E-Key socket (usually used for Wi-Fi)
    • miniPCIe socket (for miniPCIe adapters) + SIM socket (for miniPCIe cellular modem)
    • M.2 M-Key socket 2260 | 2280 for SATA SSD


Fc-pci-top.jpg Fc-pci-bottom.jpg

Specifications

  • M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
  • M.2 Key-E: 2230 (usually used for WiFi & BT module)
  • Mini PCI connector - usually used for Cell modem module
  • Micro-SIM card socket

Instructions

Hardware

Production files

FC-CEM

  • Type: Wide FACET Card
  • Features:
    • M.2 E-Key socket (usually used for Wi-Fi)
    • M.2 B-Key socket + SIM socket (for M.2 cellular modem)
    • M.2 M-Key socket 2260 | 2280 for SATA SSD


FC-CEM-top.jpg FC-CEM-bottom.jpg

Specifications

  • M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
  • M.2 Key-E: 2230 (usually used for WiFi & BT module)
  • M.2 Key-B: 3042 (usually used for Cell modem module)
  • Micro-SIM card socket

Instructions

Production files

FC-USB

fitlet2 with FC-USB has 8 USB ports (2x USB3 + 6x USB2), all type-A connectors
Fc-usb-top.jpg Fc-usb-bottom.jpg

Specifications

  • Downstream ports compatible with HS (480Mb), FS (12Mb) and LS (1.5Mb)
  • The USB port supports in single transaction translator (TT)
  • port current limit - Up to 0.5A

Instructions

Production files


FC-M2LAN

FC-M2LAN adds dual Gbit Ethernet ports to fitlet2 for a total of 4 ports.

Specifications

  • Ethernet controllers: Intel I211IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)
    • PCIe interface: PCIe v2.1 (2.5 GT/s) x1
    • Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)
    • Proxy: ECMA-393 and Windows logo for proxy offload
    • Jumbo frames
    • Interrupt moderation, VLAN support, IP checksum offload
    • RSS and MSI-X to lower CPU utilization in multi-core systems
    • Advanced cable diagnostics, auto MDI-X
    • ECC – error correcting memory in packet buffers
    • Four Software Definable Pins (SDPs)
    • Right (DS1) green LED: ON - Link, Blink - Link and activity
    • Left (DS2) green LED: ON - 100 Mbps link
    • Left (DS2) orange LED: ON - 1000 Mbps link.


FC-M2LAN-top.jpg FC-M2LAN-bottom.jpg

Instructions

Production files

FC-SCG

Includes the following socket:

  • M.2 E-key 2230 (usually used for WiFi adapter)


Fc-scg-top.jpg Fc-scg-bottom.jpg

Instructions

Hardware

Application notes

Note: GPIO Works as a GPIO extender only. Does not work as an IRQ Extender
Note: GPIO and CANbus cannot work simultaneously

Production files

Mechanical

FC-POED

  • Type: Wide FACET Card
  • Features:
    • 802.3af/802.3at compliant PoE device port with Gbit Ethernet (Intel i211)
    • M.2 E-Key socket (usually used for Wi-Fi)
    • M.2 M-Key socket 2260 | 2280 for SATA SSD

FC-POED allows powering fitlet2 from a POE source while providing a 3rd Gbit Ethernet port.
Fc-poed-top-front.jpg Fc-poed-bottom-front.jpg

Specifications

  • provided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
  • M.2 Key-E: 2230 (usually used for WiFi & BT module)
  • Ethernet controllers: Intel I211IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)
    • PCIe interface: PCIe v2.1 (2.5 GT/s) x1
    • Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)
    • Proxy: ECMA-393 and Windows logo for proxy offload
    • Jumbo frames
    • Interrupt moderation, VLAN support, IP checksum offload
    • RSS and MSI-X to lower CPU utilization in multi-core systems
    • Advanced cable diagnostics, auto MDI-X
    • ECC – error correcting memory in packet buffers
    • Four Software Definable Pins (SDPs)
    • Right (DS1) green LED: ON - Link, Blink - Link and activity
    • Left (DS2) green LED: ON - 100 Mbps link
    • Left (DS2) orange LED: ON - 1000 Mbps link.
    • IEEE 802.3 at PD Solution Interface controller supported includes Detection Hardware Classification
  • Inrush current limit (200-mA) during startup
  • Enhanced features includes automatic Maintain Power Signature (MPS)

Instructions

Production files

FC-OPLN

  • Type: Wide FACET Card
  • Features:
    • M.2 E-Key socket (usually used for Wi-Fi)
    • M.2 M-Key socket 2260 | 2280 for SATA SSD
    • SFP+ socket for optical GbE connection.


Fc-opln-bottom.jpg Fc-opln-top.jpg

Specifications

  • Supported 1Gbps SFP/SFP+ transceiver
  • LEDs: LAN SFP link/activity indication:
    • Right (DS1) green LED: ON - Link, Blink - Link and activity
    • Left (DS2) green LED: ON - 100 Mbps link
    • Left (DS2) orange LED: ON - 1000 Mbps link.
  • provided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
    • M.2 Key-E: 2230 (usually used for WiFi & BT module)
  • Ethernet controller: Intel I210IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)
    • PCIe interface: PCIe v2.1 (2.5 GT/s) x1
    • Integrated Non-Volatile Memory
    • Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)
      • Proxy: ECMA-393 and Windows logo for proxy offload
    • Audio-video bridging: IEEE 1588/802.1AS precision time synchronization
      • IEEE 802.1Qav traffic shaper (with software extensions)
    • Jumbo frames
    • Interrupt moderation, VLAN support, IP checksum offload
    • RSS and MSI-X to lower CPU utilization in multi-core systems
    • Advanced cable diagnostics, auto MDI-X
    • ECC – error correcting memory in packet buffers

Instructions

Production files