Changes
/* Instructions */
===Specifications===
* TBDDownstream ports compatible with HS (480Mb), FS (12Mb) and LS (1.5Mb)* The USB port supports in single transaction translator (TT)* port current limit - Up to 0.5A
===Instructions===
===Specifications===
* TBDprovided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)* M.2 Key-E: 2230 (usually used for WiFi & BT module)* Ethernet controllers: Intel I211IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)** PCIe interface: PCIe v2.1 (2.5 GT/s) x1** Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)** Proxy: ECMA-393 and Windows logo for proxy offload** Jumbo frames** Interrupt moderation, VLAN support, IP checksum offload** RSS and MSI-X to lower CPU utilization in multi-core systems** Advanced cable diagnostics, auto MDI-X** ECC – error correcting memory in packet buffers** Four Software Definable Pins (SDPs)** Right (DS1) green LED: ON - Link, Blink - Link and activity** Left (DS2) green LED: ON - 100 Mbps link** Left (DS2) orange LED: ON - 1000 Mbps link.
[[File:FC-M2LAN-top.jpg|200px]]
===Instructions===
* TBD[[Fitlet2 FC-SCG installation instructions]]
===Application notes===
* Type: [[Wide FACET Card]]
* Features:
** 802.3af /802.3at compliant PoE device port with Gbit Ethernet (Intel i211)
** M.2 E-Key socket (usually used for Wi-Fi)
** M.2 M-Key socket 2260 | 2280 for SATA SSD
===Specifications===
* TBDprovided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)* M.2 Key-E: 2230 (usually used for WiFi & BT module)* Ethernet controllers: Intel I211IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)** PCIe interface: PCIe v2.1 (2.5 GT/s) x1** Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)** Proxy: ECMA-393 and Windows logo for proxy offload** Jumbo frames** Interrupt moderation, VLAN support, IP checksum offload** RSS and MSI-X to lower CPU utilization in multi-core systems** Advanced cable diagnostics, auto MDI-X** ECC – error correcting memory in packet buffers** Four Software Definable Pins (SDPs)** Right (DS1) green LED: ON - Link, Blink - Link and activity** Left (DS2) green LED: ON - 100 Mbps link** Left (DS2) orange LED: ON - 1000 Mbps link.** IEEE 802.3 at PD Solution Interface controller supported includes Detection Hardware Classification* Inrush current limit (200-mA) during startup* Enhanced features includes automatic Maintain Power Signature (MPS)
===Instructions===
**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Mechanical/FC-POE-bottom.dxf FC-POED Mech Bottom]
**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Mechanical/FC-POE-top.dxf FC-POED Mech Top]
==FC-OPLN==
===Instructions===
* TBD[[Fitlet2 FC-OPLN installation instructions]]
===Production files===
