Changes

Jump to: navigation, search

Fitlet2 FACET Cards

2,494 bytes added, 13:35, 29 August 2019
/* Instructions */
* This page provides technical information about [[fitlet2]] FACET-Cards.* FACET-Cards extend [[fitlet2]] functionality and I/O.* FACET-Card stands for '''F'''unction '''A'''nd '''C'''onnectivity '''E'''xtension '''T-Card -''' (FACET) *This page provides technical information of the [[fitlet2]] compatible FACET cards.-Card standard is open to allow 3rd parties to design their own application specific FACET-Cards*The full production files of each Compulab FACET-Cards extend [[fitlet2]] functionality and I/O.Card are published below to allow 3rd parties to modify for their needs
==Custom FACET-Card design resources==
==FC-PCI==
 
* Type: [[Wide FACET Card]]
* Features:
[[File:fc-pci-top.jpg|200px]]
[[File:fc-pci-bottom.jpg|200px|middle]]
 
===Specifications===
* TBD
===Instructions===
* [[FC-PCI Pinout description table]]
===Schematics Production files===* [https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Schematics/FC-PCI-REV-1.0-schematics.pdf FC-PCI Schematics]
===*Schematics**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Schematics/FC-PCI-REV-1.0-schematics.pdf FC-PCI Schematics]*Assembly===** [https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Assembly/FC-PCI-1_1-Assembly.zip FC-PCI Rev1.1 Assembly files] ===*Layout===** [https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Layout/FC-PCI-1_1-Layout.zip FC-PCI Rev1.1 Layout files] ===*Mechanical===**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Mechanical/FC-PCI-PCB.DXF FC-PCI Mechanical - DXF]<br>**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Mechanical/FC-PCI-PCB.PDF FC-PCI Mechanical - PDF] ===Specifications===* TBD
==FC-CEM==
[[File:FC-CEM-top.jpg|200px]]
[[File:FC-CEM-bottom.jpg|200px|middle]]
 
===Specifications===
* TBD
===Instructions===
* [[fitlet2 FC-CEM installation instructions]]
===SchematicsProduction files===* [https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Schematics/fc-cem.pdf FC-CEM Schematics]
===Assembly===*Schematics** [https://fit-iot.com/files/mechanical/FACETS/FC-CEM/AssemblySchematics/FC-CEM-v.1.01_0-AssyCSSchematic.pdf zip FC-CEM placement Component side]* [https://fit-iotRev1.com/0 Schematic files/mechanical/FACETS/FC-CEM/Assembly/FC-CEM-v.1.0-AssyPS.pdf FC-CEM placement Print side]
===*Assembly**[https://fit-iot.com/files//mechanical/FACETS/FC-CEM/Assembly/FC-CEM-1_0-Assembly.zip FC-CEM Rev1.0 Assembly files] *Layout===TBD**[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Layout/FC-CEM-1_0-Layout.zip FC-CEM Rev1.0 Layout files] *Mechanical**[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Mechanical/FC-CEM.DXF FC-PCI Mechanical - DXF]<br>**[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Mechanical/FC-CEM.PDF FC-PCI Mechanical - PDF]
===Mechanical===
* [https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Mechanical/FC-CEM.DXF FC-PCI Mechanical - DXF]<br>
* [https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Mechanical/FC-CEM.PDF FC-PCI Mechanical - PDF]
===Specifications===
* TBD
==FC-USB==
[[File:fc-usb-top.jpg|200px]]
[[File:fc-usb-bottom.jpg|200px|middle]]
 
===Specifications===
* Downstream ports compatible with HS (480Mb), FS (12Mb) and LS (1.5Mb)
* The USB port supports in single transaction translator (TT)
* port current limit - Up to 0.5A
===Instructions===
* [[fitlet2 FC-USB installation instructions]]
===Schematics Production files===*Schematics** [https://fit-iot.com/files/mechanical/FACETS/FC-USB/Schematics/FC-USB-rev1_1-1Schematics.0.pdf zip FC-USB SchematicsRev1.1 Schematic files]
===*Assembly===** [https://fit-iot.com/files/mechanical/FACETS/FC-USB/Assembly/FC-USB-v11_1-AssyCSAssembly.pdf zip FC-USB placement Component side]* [https://fit-iotRev1.com/1 Assembly files/mechanical/FACETS/FC-USB/Assembly/FC-USB-v1-AssyPS.pdf FC-USB placement Print side]
===*Layout===TBD**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Layout/FC-USB-1_1-Layout.ZIP FC-USB Rev1.1 Layout files] *Mechanical**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Mechanical/FC-USB-v1.0-bottom.dxf FC-USB Mech Bottom]**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Mechanical/FC-USB-v1.0-top.dxf FC-USB Mech Top]
===Mechanical===
* [https://fit-iot.com/files/mechanical/FACETS/FC-USB/Mechanical/FC-USB-v1.0-bottom.dxf FC-USB Mech Bottom]
* [https://fit-iot.com/files/mechanical/FACETS/FC-USB/Mechanical/FC-USB-v1.0-top.dxf FC-USB Mech Top]
===Specifications===
* TBD
==FC-M2LAN==
FC-M2LAN adds dual Gbit Ethernet ports to fitlet2 for a total of 4 ports.
<br>
 
===Specifications===
* provided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
* M.2 Key-E: 2230 (usually used for WiFi & BT module)
* Ethernet controllers: Intel I211IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)
** PCIe interface: PCIe v2.1 (2.5 GT/s) x1
** Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)
** Proxy: ECMA-393 and Windows logo for proxy offload
** Jumbo frames
** Interrupt moderation, VLAN support, IP checksum offload
** RSS and MSI-X to lower CPU utilization in multi-core systems
** Advanced cable diagnostics, auto MDI-X
** ECC – error correcting memory in packet buffers
** Four Software Definable Pins (SDPs)
** Right (DS1) green LED: ON - Link, Blink - Link and activity
** Left (DS2) green LED: ON - 100 Mbps link
** Left (DS2) orange LED: ON - 1000 Mbps link.
 
[[File:FC-M2LAN-top.jpg|200px]]
===Instructions===
* [[Fitlet2 FC-M2LAN installation instructions]]===Schematics===* [http://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Schematics/FC-M2LAN.pdf FC-M2LAN Schematics]
===AssemblyProduction files===*Schematics** [httpshttp://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Schematics/FC-M2LAN-AssyCS1_0-Schematics.pdf rar FC-M2LAN placement Component side]* [https://fit-iotRev1.com/0 Schematic files/mechanical/FACETS/FC-M2LAN/FC-M2LAN-AssyPS.pdf FC-M2LAN placement Print side]
===*Assembly**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Assembly/FC-M2LAN-1_0-Assembly.rar FC-M2LAN Rev1.0 Assembly files] *Layout===TBD**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Layout/FC-M2LAN-1_0-Layout.zip FC-M2LAN Rev1.0 Layout files] *Mechanical**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Mechanical/FC-M2LAN-TOP.dxf FC-M2LAN Mechanical Top]**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Mechanical/FC-M2LAN-bottom.dxf FC-M2LAN mechaical Bottom]
===Mechanical===
* [https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Mechanical/FC-M2LAN-TOP.dxf FC-M2LAN Mechanical Top]
* [https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Mechanical/FC-M2LAN-bottom.dxf FC-M2LAN mechaical Bottom]
===Specifications===
* TBD
==FC-SCG==
[[File:fc-scg-top.jpg|200px]]
[[File:fc-scg-bottom.jpg|200px|middle]]
 
===Specifications===
* TBD
 
===Instructions===
* [[Fitlet2 FC-SCG installation instructions]]
===Application notes===
Note: GPIO and CANbus cannot work simultaneously
===Schematics Production files===* [https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Schematics/FC-SCG-Schematics.pdf FC-SCG Schematics]
===Assembly===*Schematics** [https://fit-iot.com/files/mechanical/FACETS/FC-SCG/AssemblySchematics/FC-SCG-rev11_0-AssyCSSchematics.pdf zip FC-SCG placement Component side]* [https://fit-iotRev1.com/0 Schematic files/mechanical/FACETS/FC-SCG/Assembly/FC-SCG-rev1-AssyPS.pdf FC-SCG placement Print side]
===Layout===*AssemblyTBD**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Assembly/FC-SCG-1_0-Assembly.zip FC-SCG Rev1.0 Assembly files]
===Mechanical===*Layout** [https://fit-iot.com/files/mechanical/FACETS/FC-SCG/MechanicalLayout/FC-SCG-rev1.01_0-CSLayout.dxf zip FC-SCG Mech Component side]* [https://fit-iotRev1.com/0 Layout files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-PS.dxf FC-SCG Mech Print side]
===Specifications===Mechanical* TBD*[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-CS.dxf FC-SCG Mech Component side]**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-PS.dxf FC-SCG Mech Print side]
==FC-POED==
* Type: [[Wide FACET Card]]
* Features:
** 802.3af /802.3at compliant PoE device port with Gbit Ethernet (Intel i211)
** M.2 E-Key socket (usually used for Wi-Fi)
** M.2 M-Key socket 2260 | 2280 for SATA SSD
[[File:fc-poed-top-front.jpg|200px]]
[[File:fc-poed-bottom-front.jpg|200px|middle]]
 
===Specifications===
* provided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
* M.2 Key-E: 2230 (usually used for WiFi & BT module)
* Ethernet controllers: Intel I211IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)
** PCIe interface: PCIe v2.1 (2.5 GT/s) x1
** Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)
** Proxy: ECMA-393 and Windows logo for proxy offload
** Jumbo frames
** Interrupt moderation, VLAN support, IP checksum offload
** RSS and MSI-X to lower CPU utilization in multi-core systems
** Advanced cable diagnostics, auto MDI-X
** ECC – error correcting memory in packet buffers
** Four Software Definable Pins (SDPs)
** Right (DS1) green LED: ON - Link, Blink - Link and activity
** Left (DS2) green LED: ON - 100 Mbps link
** Left (DS2) orange LED: ON - 1000 Mbps link.
** IEEE 802.3 at PD Solution Interface controller supported includes Detection Hardware Classification
* Inrush current limit (200-mA) during startup
* Enhanced features includes automatic Maintain Power Signature (MPS)
===Instructions===
* [[fitlet2 FC-POED installation instructions]]
===Schematics Production files===*Schematics** [https://fit-iot.com/files/mechanical/FACETS/FC-POED/Schematics/FC-POEPOED-1_0-Schematics.pdf rar FC-POED SchematicsRev1.0 Schematic files]
===*Assembly===** [https://fit-iot.com/files/mechanical/FACETS/FC-POED/Assembly/FC-POE-v1POED-AssyCS1_0Assembly.pdf zip FC-POED placement Component side]* [https://fit-iotRev1.com/0 Assembly files/mechanical/FACETS/FC-POED/Assembly/FC-POE-v1-AssyPS.pdf FC-POED placement Print side]
===*Layout===TBD**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Layout/FC-POED-1_0-Layout.zip FC-POED Rev1.0 Layout files]
===*Mechanical===** [https://fit-iot.com/files/mechanical/FACETS/FC-POED/Mechanical/FC-POE-bottom.dxf FC-POED Mech Bottom]** [https://fit-iot.com/files/mechanical/FACETS/FC-POED/Mechanical/FC-POE-top.dxf FC-POED Mech Top] ===Specifications===* TBD
==FC-OPLN==
[[File:fc-opln-bottom.jpg|200px|middle]]
[[File:fc-opln-top.jpg|200px]]
 
===Schematics ===
* [https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Schematics/FC-OPLN-Schematics.pdf FC-OPLN Schematics]
 
===Assembly===
* [https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Assembly/FC-OPLN-AssyCS.pdf FC-OPLN Placement Component side]
* [https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Assembly/FC-OPLN-AssyPS.pdf FC-OPLN Placement Print side]
 
===Layout===
TBD
 
===Mechanical===
* [http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC_OPLN.dxf FC-OPLEN Mech Top]
* [http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC_OPLN-Bottom.dxf FC-OPLN Mech bottom]
* [http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC-OPLN_asm.STP FC-OPLN 3D .STP file]
* [http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC-OPLN_asm.x_t FC-OPLN 3D .x_t file]
===Specifications===
 
* Supported 1Gbps SFP/SFP+ transceiver
* LEDs: LAN SFP link/activity indication:
** Advanced cable diagnostics, auto MDI-X
** ECC – error correcting memory in packet buffers
 
===Instructions===
* [[Fitlet2 FC-OPLN installation instructions]]
 
===Production files===
*Schematics
**[https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Schematics/FC-OPLN-1_0-Schematics.zip FC-OPLN Rev1.0 Schematic files]
 
*Assembly
**[https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Assembly/FC-OPLN-1_0-Assembly.zip FC-OPLN Rev1.0 Assembly files]
 
*Layout
**[https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Layout/FC-OPLN-1_0-Layout.zip FC-OPLN Rev1.0 Layout files]
 
*Mechanical
**[http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC_OPLN.dxf FC-OPLEN Mech Top]
**[http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC_OPLN-Bottom.dxf FC-OPLN Mech bottom]
**[http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC-OPLN_asm.STP FC-OPLN 3D .STP file]
**[http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC-OPLN_asm.x_t FC-OPLN 3D .x_t file]
 
 
[[category:fitlet2]]
[[category:Extension boards]]
1,586
edits