Difference between revisions of "Fitlet2 FACET Cards"

From fit-PC wiki
Jump to: navigation, search
(FC-CEM)   (change visibility)
(Instructions)   (change visibility)
(16 intermediate revisions by 2 users not shown)
Line 1: Line 1:
'''F'''unction '''A'''nd '''C'''onnectivity '''E'''xtension '''T-Card -''' (FACET)
+
* This page provides technical information about [[fitlet2]] FACET-Cards.
 
+
* FACET-Cards extend [[fitlet2]] functionality and I/O.
*This page provides technical information of the [[fitlet2]] compatible FACET cards.
+
* FACET-Card stands for '''F'''unction '''A'''nd '''C'''onnectivity '''E'''xtension '''T-Card'''
*FACET-Cards extend [[fitlet2]] functionality and I/O.
+
* FACET-Card standard is open to allow 3rd parties to design their own application specific FACET-Cards
 +
* The full production files of each Compulab FACET-Card are published below to allow 3rd parties to modify for their needs
  
 
==Custom FACET-Card design resources==
 
==Custom FACET-Card design resources==
Line 24: Line 25:
  
 
==FC-PCI==
 
==FC-PCI==
 +
 
* Type: [[Wide FACET Card]]
 
* Type: [[Wide FACET Card]]
 
* Features:
 
* Features:
Line 32: Line 34:
 
[[File:fc-pci-top.jpg|200px]]
 
[[File:fc-pci-top.jpg|200px]]
 
[[File:fc-pci-bottom.jpg|200px|middle]]
 
[[File:fc-pci-bottom.jpg|200px|middle]]
 +
 +
===Specifications===
 +
* TBD
  
 
===Instructions===
 
===Instructions===
Line 39: Line 44:
 
* [[FC-PCI Pinout description table]]
 
* [[FC-PCI Pinout description table]]
  
===Schematics ===
+
===Production files===
* [https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Schematics/FC-PCI-REV-1.0-schematics.pdf FC-PCI Schematics]
+
  
===Assembly===
+
*Schematics
* [https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Assembly/FC-PCI-1_1-Assembly.zip FC-PCI Rev1.1 Assembly files]
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Schematics/FC-PCI-REV-1.0-schematics.pdf FC-PCI Schematics]
 
+
*Assembly
===Layout===
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Assembly/FC-PCI-1_1-Assembly.zip FC-PCI Rev1.1 Assembly files]
* [https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Layout/FC-PCI-1_1-Layout.zip FC-PCI Rev1.1 Layout files]
+
*Layout
 
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Layout/FC-PCI-1_1-Layout.zip FC-PCI Rev1.1 Layout files]
===Mechanical===
+
*Mechanical
[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Mechanical/FC-PCI-PCB.DXF FC-PCI Mechanical - DXF]<br>
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Mechanical/FC-PCI-PCB.DXF FC-PCI Mechanical - DXF]<br>
[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Mechanical/FC-PCI-PCB.PDF FC-PCI Mechanical - PDF]
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Mechanical/FC-PCI-PCB.PDF FC-PCI Mechanical - PDF]
 
+
===Specifications===
+
* TBD
+
  
 
==FC-CEM==
 
==FC-CEM==
Line 64: Line 65:
 
[[File:FC-CEM-top.jpg|200px]]
 
[[File:FC-CEM-top.jpg|200px]]
 
[[File:FC-CEM-bottom.jpg|200px|middle]]
 
[[File:FC-CEM-bottom.jpg|200px|middle]]
 +
 +
===Specifications===
 +
* TBD
  
 
===Instructions===
 
===Instructions===
 
* [[fitlet2 FC-CEM installation instructions]]
 
* [[fitlet2 FC-CEM installation instructions]]
  
===Schematics===
+
===Production files===
* [https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Schematics/FC-CEM-1_0-Schematic.zip FC-CEM Rev1.0 Schematic files]
+
  
===Assembly===
+
*Schematics
* [https://fit-iot.com/files//mechanical/FACETS/FC-CEM/Assembly/FC-CEM-1_0-Assembly.zip FC-CEM Rev1.0 Assembly files]
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Schematics/FC-CEM-1_0-Schematic.zip FC-CEM Rev1.0 Schematic files]
  
===Layout===
+
*Assembly
* [https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Layout/FC-CEM-1_0-Layout.zip FC-CEM Rev1.0 Layout files]
+
**[https://fit-iot.com/files//mechanical/FACETS/FC-CEM/Assembly/FC-CEM-1_0-Assembly.zip FC-CEM Rev1.0 Assembly files]
 +
 
 +
*Layout
 +
**[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Layout/FC-CEM-1_0-Layout.zip FC-CEM Rev1.0 Layout files]
 +
 
 +
*Mechanical
 +
**[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Mechanical/FC-CEM.DXF FC-PCI Mechanical - DXF]<br>
 +
**[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Mechanical/FC-CEM.PDF FC-PCI Mechanical - PDF]
  
===Mechanical===
 
* [https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Mechanical/FC-CEM.DXF FC-PCI Mechanical - DXF]<br>
 
* [https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Mechanical/FC-CEM.PDF FC-PCI Mechanical - PDF]
 
  
===Specifications===
 
* TBD
 
  
 
==FC-USB==
 
==FC-USB==
Line 93: Line 98:
 
[[File:fc-usb-top.jpg|200px]]
 
[[File:fc-usb-top.jpg|200px]]
 
[[File:fc-usb-bottom.jpg|200px|middle]]
 
[[File:fc-usb-bottom.jpg|200px|middle]]
 +
 +
===Specifications===
 +
* TBD
  
 
===Instructions===
 
===Instructions===
 
* [[fitlet2 FC-USB installation instructions]]
 
* [[fitlet2 FC-USB installation instructions]]
  
===Schematics ===
+
===Production files===
* [https://fit-iot.com/files/mechanical/FACETS/FC-USB/Schematics/FC-USB-rev-1.0.pdf FC-USB Schematics]
+
*Schematics
 +
**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Schematics/FC-USB-1_1-Schematics.zip FC-USB Rev1.1 Schematic files]
  
===Assembly===
+
*Assembly
* [https://fit-iot.com/files/mechanical/FACETS/FC-USB/Assembly/FC-USB-v1-AssyCS.pdf FC-USB placement Component side]
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Assembly/FC-USB-1_1-Assembly.zip FC-USB Rev1.1 Assembly files]
* [https://fit-iot.com/files/mechanical/FACETS/FC-USB/Assembly/FC-USB-v1-AssyPS.pdf FC-USB placement Print side]
+
  
===Layout===
+
*Layout
TBD
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Layout/FC-USB-1_1-Layout.ZIP FC-USB Rev1.1 Layout files]
 +
 
 +
*Mechanical
 +
**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Mechanical/FC-USB-v1.0-bottom.dxf FC-USB Mech Bottom]
 +
**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Mechanical/FC-USB-v1.0-top.dxf FC-USB Mech Top]
  
===Mechanical===
 
* [https://fit-iot.com/files/mechanical/FACETS/FC-USB/Mechanical/FC-USB-v1.0-bottom.dxf FC-USB Mech Bottom]
 
* [https://fit-iot.com/files/mechanical/FACETS/FC-USB/Mechanical/FC-USB-v1.0-top.dxf FC-USB Mech Top]
 
  
===Specifications===
 
* TBD
 
  
 
==FC-M2LAN==
 
==FC-M2LAN==
Line 121: Line 128:
 
FC-M2LAN adds dual Gbit Ethernet ports to fitlet2 for a total of 4 ports.
 
FC-M2LAN adds dual Gbit Ethernet ports to fitlet2 for a total of 4 ports.
 
<br>
 
<br>
 +
 +
===Specifications===
 +
* TBD
  
 
[[File:FC-M2LAN-top.jpg|200px]]
 
[[File:FC-M2LAN-top.jpg|200px]]
Line 126: Line 136:
  
 
===Instructions===
 
===Instructions===
* [[Fitlet2 FC-M2LAN installation instructions]]
+
*[[Fitlet2 FC-M2LAN installation instructions]]
===Schematics===
+
* [http://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Schematics/FC-M2LAN.pdf FC-M2LAN Schematics]
+
  
===Assembly===
+
===Production files===
* [https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/FC-M2LAN-AssyCS.pdf FC-M2LAN placement Component side]
+
*Schematics
* [https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/FC-M2LAN-AssyPS.pdf FC-M2LAN placement Print side]
+
**[http://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Schematics/FC-M2LAN-1_0-Schematics.rar FC-M2LAN Rev1.0 Schematic files]
  
===Layout===
+
*Assembly
TBD
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Assembly/FC-M2LAN-1_0-Assembly.rar FC-M2LAN Rev1.0 Assembly files]
 +
 
 +
*Layout
 +
**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Layout/FC-M2LAN-1_0-Layout.zip FC-M2LAN Rev1.0 Layout files]
 +
 
 +
*Mechanical
 +
**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Mechanical/FC-M2LAN-TOP.dxf FC-M2LAN Mechanical Top]
 +
**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Mechanical/FC-M2LAN-bottom.dxf FC-M2LAN mechaical Bottom]
  
===Mechanical===
 
* [https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Mechanical/FC-M2LAN-TOP.dxf FC-M2LAN Mechanical Top]
 
* [https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Mechanical/FC-M2LAN-bottom.dxf FC-M2LAN mechaical Bottom]
 
  
===Specifications===
 
* TBD
 
  
 
==FC-SCG==
 
==FC-SCG==
Line 155: Line 165:
 
[[File:fc-scg-top.jpg|200px]]
 
[[File:fc-scg-top.jpg|200px]]
 
[[File:fc-scg-bottom.jpg|200px|middle]]
 
[[File:fc-scg-bottom.jpg|200px|middle]]
 +
 +
===Specifications===
 +
* TBD
 +
 +
===Instructions===
 +
* [[Fitlet2 FC-SCG installation instructions]]
  
 
===Application notes===
 
===Application notes===
Line 163: Line 179:
 
  Note: GPIO and CANbus cannot work simultaneously
 
  Note: GPIO and CANbus cannot work simultaneously
  
===Schematics ===
+
===Production files===
* [https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Schematics/FC-SCG-Schematics.pdf FC-SCG Schematics]
+
  
===Assembly===
+
*Schematics
* [https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Assembly/FC-SCG-rev1-AssyCS.pdf FC-SCG placement Component side]
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Schematics/FC-SCG-1_0-Schematics.zip FC-SCG Rev1.0 Schematic files]
* [https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Assembly/FC-SCG-rev1-AssyPS.pdf FC-SCG placement Print side]
+
  
===Layout===
+
*Assembly
TBD
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Assembly/FC-SCG-1_0-Assembly.zip FC-SCG Rev1.0 Assembly files]
  
===Mechanical===
+
*Layout
* [https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-CS.dxf FC-SCG Mech Component side]
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Layout/FC-SCG-1_0-Layout.zip FC-SCG Rev1.0 Layout files]
* [https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-PS.dxf FC-SCG Mech Print side]
+
  
===Specifications===
+
Mechanical
* TBD
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-CS.dxf FC-SCG Mech Component side]
 +
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-PS.dxf FC-SCG Mech Print side]
  
 
==FC-POED==
 
==FC-POED==
Line 191: Line 205:
 
[[File:fc-poed-top-front.jpg|200px]]
 
[[File:fc-poed-top-front.jpg|200px]]
 
[[File:fc-poed-bottom-front.jpg|200px|middle]]
 
[[File:fc-poed-bottom-front.jpg|200px|middle]]
 +
 +
===Specifications===
 +
* TBD
  
 
===Instructions===
 
===Instructions===
 
* [[fitlet2 FC-POED installation instructions]]
 
* [[fitlet2 FC-POED installation instructions]]
  
===Schematics ===
+
===Production files===
* [https://fit-iot.com/files/mechanical/FACETS/FC-POED/Schematics/FC-POE.pdf FC-POED Schematics]
+
*Schematics
 +
**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Schematics/FC-POED-1_0-Schematics.rar FC-POED Rev1.0 Schematic files]
  
===Assembly===
+
*Assembly
* [https://fit-iot.com/files/mechanical/FACETS/FC-POED/Assembly/FC-POE-v1-AssyCS.pdf FC-POED placement Component side]
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Assembly/FC-POED-1_0Assembly.zip FC-POED Rev1.0 Assembly files]
* [https://fit-iot.com/files/mechanical/FACETS/FC-POED/Assembly/FC-POE-v1-AssyPS.pdf FC-POED placement Print side]
+
  
===Layout===
+
*Layout
TBD
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Layout/FC-POED-1_0-Layout.zip FC-POED Rev1.0 Layout files]
 +
 
 +
*Mechanical
 +
**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Mechanical/FC-POE-bottom.dxf FC-POED Mech Bottom]
 +
**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Mechanical/FC-POE-top.dxf FC-POED Mech Top]
  
===Mechanical===
 
* [https://fit-iot.com/files/mechanical/FACETS/FC-POED/Mechanical/FC-POE-bottom.dxf FC-POED Mech Bottom]
 
* [https://fit-iot.com/files/mechanical/FACETS/FC-POED/Mechanical/FC-POE-top.dxf FC-POED Mech Top]
 
  
===Specifications===
 
* TBD
 
  
 
==FC-OPLN==
 
==FC-OPLN==
Line 221: Line 237:
 
[[File:fc-opln-bottom.jpg|200px|middle]]
 
[[File:fc-opln-bottom.jpg|200px|middle]]
 
[[File:fc-opln-top.jpg|200px]]
 
[[File:fc-opln-top.jpg|200px]]
 
===Schematics ===
 
* [https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Schematics/FC-OPLN-Schematics.pdf FC-OPLN Schematics]
 
 
===Assembly===
 
* [https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Assembly/FC-OPLN-AssyCS.pdf FC-OPLN Placement Component side]
 
* [https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Assembly/FC-OPLN-AssyPS.pdf FC-OPLN Placement Print side]
 
 
===Layout===
 
TBD
 
 
===Mechanical===
 
* [http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC_OPLN.dxf FC-OPLEN Mech Top]
 
* [http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC_OPLN-Bottom.dxf FC-OPLN Mech bottom]
 
* [http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC-OPLN_asm.STP FC-OPLN 3D .STP file]
 
* [http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC-OPLN_asm.x_t FC-OPLN 3D .x_t file]
 
  
 
===Specifications===
 
===Specifications===
 
 
* Supported 1Gbps SFP/SFP+ transceiver
 
* Supported 1Gbps SFP/SFP+ transceiver
 
* LEDs: LAN SFP link/activity indication:  
 
* LEDs: LAN SFP link/activity indication:  
Line 259: Line 258:
 
** Advanced cable diagnostics, auto MDI-X
 
** Advanced cable diagnostics, auto MDI-X
 
** ECC – error correcting memory in packet buffers
 
** ECC – error correcting memory in packet buffers
 +
 +
===Instructions===
 +
* TBD
 +
 +
===Production files===
 +
*Schematics
 +
**[https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Schematics/FC-OPLN-1_0-Schematics.zip FC-OPLN Rev1.0 Schematic files]
 +
 +
*Assembly
 +
**[https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Assembly/FC-OPLN-1_0-Assembly.zip FC-OPLN Rev1.0 Assembly files]
 +
 +
*Layout
 +
**[https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Layout/FC-OPLN-1_0-Layout.zip FC-OPLN Rev1.0 Layout files]
 +
 +
*Mechanical
 +
**[http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC_OPLN.dxf FC-OPLEN Mech Top]
 +
**[http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC_OPLN-Bottom.dxf FC-OPLN Mech bottom]
 +
**[http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC-OPLN_asm.STP FC-OPLN 3D .STP file]
 +
**[http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC-OPLN_asm.x_t FC-OPLN 3D .x_t file]
 +
 +
  
 
[[category:fitlet2]]
 
[[category:fitlet2]]
 
[[category:Extension boards]]
 
[[category:Extension boards]]

Revision as of 09:42, 23 May 2019

  • This page provides technical information about fitlet2 FACET-Cards.
  • FACET-Cards extend fitlet2 functionality and I/O.
  • FACET-Card stands for Function And Connectivity Extension T-Card
  • FACET-Card standard is open to allow 3rd parties to design their own application specific FACET-Cards
  • The full production files of each Compulab FACET-Card are published below to allow 3rd parties to modify for their needs

Custom FACET-Card design resources

Mechanical constraints

There are two form-factors of FACET-Cards

  • Narrow occupies the M.2 E-Key slot (leaving the SATA slot native)
  • Wide FACET-Card occupies both M.2 slot (usually requiring SATA slot on the FACET itself)

Narrow FACET-Card mechanical constraints

Wide FACET-Card mechanical constraints

FACET-Card pinout

FC-PCI fitlet2 FACET Pinout description table

FC-PCI

  • Type: Wide FACET Card
  • Features:
    • M.2 E-Key socket (usually used for Wi-Fi)
    • miniPCIe socket (for miniPCIe adapters) + SIM socket (for miniPCIe cellular modem)
    • M.2 M-Key socket 2260 | 2280 for SATA SSD


Fc-pci-top.jpg Fc-pci-bottom.jpg

Specifications

  • TBD

Instructions

Hardware

Production files

FC-CEM

  • Type: Wide FACET Card
  • Features:
    • M.2 E-Key socket (usually used for Wi-Fi)
    • M.2 B-Key socket + SIM socket (for M.2 cellular modem)
    • M.2 M-Key socket 2260 | 2280 for SATA SSD


FC-CEM-top.jpg FC-CEM-bottom.jpg

Specifications

  • TBD

Instructions

Production files


FC-USB

fitlet2 with FC-USB has 8 USB ports (2x USB3 + 6x USB2), all type-A connectors
Fc-usb-top.jpg Fc-usb-bottom.jpg

Specifications

  • TBD

Instructions

Production files


FC-M2LAN

FC-M2LAN adds dual Gbit Ethernet ports to fitlet2 for a total of 4 ports.

Specifications

  • TBD

FC-M2LAN-top.jpg FC-M2LAN-bottom.jpg

Instructions

Production files


FC-SCG

Includes the following socket:

  • M.2 E-key 2230 (usually used for WiFi adapter)


Fc-scg-top.jpg Fc-scg-bottom.jpg

Specifications

  • TBD

Instructions

Application notes

Note: GPIO Works as a GPIO extender only. Does not work as an IRQ Extender
Note: GPIO and CANbus cannot work simultaneously

Production files

Mechanical

FC-POED

  • Type: Wide FACET Card
  • Features:
    • 802.3af compliant PoE device port with Gbit Ethernet (Intel i211)
    • M.2 E-Key socket (usually used for Wi-Fi)
    • M.2 M-Key socket 2260 | 2280 for SATA SSD

FC-POED allows powering fitlet2 from a POE source while providing a 3rd Gbit Ethernet port.
Fc-poed-top-front.jpg Fc-poed-bottom-front.jpg

Specifications

  • TBD

Instructions

Production files


FC-OPLN

  • Type: Wide FACET Card
  • Features:
    • M.2 E-Key socket (usually used for Wi-Fi)
    • M.2 M-Key socket 2260 | 2280 for SATA SSD
    • SFP+ socket for optical GbE connection.


Fc-opln-bottom.jpg Fc-opln-top.jpg

Specifications

  • Supported 1Gbps SFP/SFP+ transceiver
  • LEDs: LAN SFP link/activity indication:
    • Right (DS1) green LED: ON - Link, Blink - Link and activity
    • Left (DS2) green LED: ON - 100 Mbps link
    • Left (DS2) orange LED: ON - 1000 Mbps link.
  • provided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
    • M.2 Key-E: 2230 (usually used for WiFi & BT module)
  • Ethernet controller: Intel I210IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)
    • PCIe interface: PCIe v2.1 (2.5 GT/s) x1
    • Integrated Non-Volatile Memory
    • Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)
      • Proxy: ECMA-393 and Windows logo for proxy offload
    • Audio-video bridging: IEEE 1588/802.1AS precision time synchronization
      • IEEE 802.1Qav traffic shaper (with software extensions)
    • Jumbo frames
    • Interrupt moderation, VLAN support, IP checksum offload
    • RSS and MSI-X to lower CPU utilization in multi-core systems
    • Advanced cable diagnostics, auto MDI-X
    • ECC – error correcting memory in packet buffers

Instructions

  • TBD

Production files