Changes

Jump to: navigation, search

Fitlet2 BIOS reset for rev 1.1 and older

1,160 bytes added, 08:04, 17 May 2020
Created page with "*For BIOS version FLT2.0.40.01.00 and above. Reset BIOS default following the following procedure for [[SBC Product Line: fitlet2-HBPN| SBC revisions 1.1]]: #Unplug power ca..."
*For BIOS version FLT2.0.40.01.00 and above.

Reset BIOS default following the following procedure for [[SBC Product Line: fitlet2-HBPN| SBC revisions 1.1]]:

#Unplug power cable from the fitlet2
#Remove the 4x Phillips Chassis screws
#Remove bottom and top cover
#Remove the RAM stick
#Plug in power cable (should turn on automatically), and Wait ~10 seconds
#Unplug power cable
#Assemble back the RAM stick
#Carefully unplug the RTC Battery from the 2pin connector
#Plug power cable (should turn on automatically)
#Shutdown the PC
#Unplug the power cable
#Plug the RTC Battery back in
#Plug Power cable

At this stage the BIOS settings should be reset to defaults.


----

*In cases BIOS version is older, you may also try to reset BIOS blindly:
Please disconnect the power core and perform the following:

# Remove all the storage devices (internal and external).
# Boot the system and wait for ~15 seconds to ensure the system booted to the BIOS menu.
# Press F3 key and after that the Enter key to load the default menu settings
# Press F4 key and after that the Enter key to save and exit
# The system should restart and boot with default menu settings.