Changes

# Connect the prepared USB flash device UFD to the fitlet target unit and boot.power up# Press the '''DEL''' key during the boot to enter until the BIOS menu.Setup appears# Under Browse to the '''Save & Exit tab, select ''' menu# Click on the option '''“Launch Launch EFI Shell from filesystem device”device'''option# When the The system enters will boot to the UEFI modeEFI Shell, type the command: ''FLASH FLTT'' and press Enter.# The BIOS flashing after 4 seconds the automatic flash process will start.<pbr>'''Note:''' At the start of the process, the system will hang for 1 minute. This is expected behaviorbehaviour. Please, don’t interrupt it.</p># When At the end of the flashing process ends and , remove the prompt line appearsUFD, type the command: '''reset''' and press the Enter.key