Difference between revisions of "Fit-PC2 BIOS Update"
From fit-PC wiki
(→To prepare bootable USB image on Windows based machine) (change visibility) |
|||
Line 1: | Line 1: | ||
− | == To prepare bootable USB image on Windows based machine == | + | == To prepare bootable USB image on Windows XP based machine == |
# Download and extract [http://www.fit-pc2.com/download/bios/bios_update.zip bios_update.zip] | # Download and extract [http://www.fit-pc2.com/download/bios/bios_update.zip bios_update.zip] | ||
# Insert thumb drive into USB socket (ensure you don't have any other USB mass storage devices connected). | # Insert thumb drive into USB socket (ensure you don't have any other USB mass storage devices connected). |
Revision as of 11:15, 13 August 2009
To prepare bootable USB image on Windows XP based machine
- Download and extract bios_update.zip
- Insert thumb drive into USB socket (ensure you don't have any other USB mass storage devices connected).
- Run ImUpdate.exe
- select Target - desired disk (by letter/size).
- select Source image - 128MBDOS.img.
- Press Start Restore to proceed.
- Wait until completion - "Finished" will appear under Messages.
- Take out thumb drive and insert it again. It should now be assigned a drive letter.
- Copy to the root directory on the thumb drive files SFlash16.exe
- Download and extract latest BIOS
- Copy to the root directory on the thumb drive the xxxxxx.ROM file.
To prepare bootable USB image on Linux based machine
- Download and extract bios_update.zip
- Insert thumb drive into USB socket (ensure you don't have any other USB mass storage devices connected).
- Follow USB Image Writing Guide to write 128MBDOS.img to the USB thumb drive
- Take out thumb drive and insert it again. Ubuntu should automount it.
- Copy to the root directory on the thumb drive files SFlash16.exe
- Download and extract latest BIOS
- Copy to the root directory on the thumb drive the xxxxxx.ROM file.
To update BIOS
- Insert thumb drive and boot. Press F2 during boot to enter CMOS Setup Utility
- Set 1st boot priority to USB KEY
- Save and exit
fit-PC2 should boot to DOS from the thumb drive.
- Type
SFlash16.exe <ROM file name>
- Wait until completion - a message "Flash memory has been successfully programmed" should appear
- Reboot