Difference between revisions of "Features"
From fit-PC wiki
(→Internal USB thumb-drive) (change visibility) |
(→IR (fit-PC2 only)) (change visibility) |
||
Line 31: | Line 31: | ||
The serial port RS232 is brought-out through a custom mini connector. fit-PC2i is supplied with a cable to DB9 female. | The serial port RS232 is brought-out through a custom mini connector. fit-PC2i is supplied with a cable to DB9 female. | ||
− | == IR (fit-PC2 only) == | + | == Consumer IR receiver (fit-PC2 only) == |
+ | * The IR sub-system includes | ||
+ | ** IR receiver Vishay TSOP38238 or compatible | ||
+ | ** Micro-controller Atmel ATtiny2313-20MU connected through USB interface | ||
+ | * fit-PC2 IR works at 38 KHz - compatible with most consumer IR remotes | ||
+ | * SW support: | ||
+ | ** Windows - EventGhost | ||
+ | ** Linux - LIRC | ||
+ | |||
== Display == | == Display == | ||
=== Display drivers === | === Display drivers === |
Revision as of 09:24, 11 July 2010
In this document fit-PC relates to both fit-PC2 & fit-PC2i
Contents
Watchdog
- Watchdog reboots the system when it freezes
- Watchdog should be enabled in BIOS and triggered periodically from OS.
- See Watchdog in Windows XP
- See watchdog forum discussion
Power consumption
Below are power consumption measurements for fit-PC
- Measurements are done on 12V DC - fit-PC only excluding power supply
- HDD and USB keyboard & mouse are included. fit-PC is connected to XGA display
- Measurements are done in Windows XP
fit-PC2 consumption
- Off: 0.45W
- Standby: 1.0W
- XP average: 6.5W
- XP peak: 9.12W
fit-PC2i consumption
- Off: 1.2W
- Standby: 1.2W
- XP average: 7.1W
- XP Peak: 9.24W
Ethernet
- fit-PC2 is using Realtek RTL8111D GbE controller
- fit-PC2i is using Realtek RTL8111C GbE controller
Wake-on-LAN (fit-PC2i only)
Serial port (fit-PC2i only)
The serial port RS232 is brought-out through a custom mini connector. fit-PC2i is supplied with a cable to DB9 female.
Consumer IR receiver (fit-PC2 only)
- The IR sub-system includes
- IR receiver Vishay TSOP38238 or compatible
- Micro-controller Atmel ATtiny2313-20MU connected through USB interface
- fit-PC2 IR works at 38 KHz - compatible with most consumer IR remotes
- SW support:
- Windows - EventGhost
- Linux - LIRC