Difference between revisions of "FAQ:fit-PC4"

From fit-PC wiki
Jump to: navigation, search
(Software)   (change visibility)
Line 8: Line 8:
 
=== GPIO drive capabilities ===
 
=== GPIO drive capabilities ===
 
GPIO drive strength value is configured via GPIO control registers and have 4 possible configurations: 4mA, 8mA, 12mA, 16mA
 
GPIO drive strength value is configured via GPIO control registers and have 4 possible configurations: 4mA, 8mA, 12mA, 16mA
 +
 +
=== Using single RAM memory module with fit-PC4 ===
 +
When single SO-DIMM RAM memory module used it should populate the slot closer to an edge (P7) of the PCB, in order to pass memory initialization process.
 +
  
 
== Software ==
 
== Software ==

Revision as of 09:22, 25 October 2015

Hardware

Which power supplies can power the fit-PC4?

fit-PC4 bundle comes with external AC/DC wall power supply, providing unregulated 10–15Vdc input voltage range, 12Vdc nominal, 36W output power for Value version and 60W output power for the Pro version. However, any power supply able to supply ~36W/60W from 12Vdc source will be fine.

What are power capabilities of fit-PC4 USB ports?

USB ports VBUS (5V) pair supplied via onboard power switch with current limit set to 2.1A, which means either each USB port capable sourcing up to 1.05A in case two bus powered devices are connected, or sourcing 2.1A in case single bus powered device is connected.

GPIO drive capabilities

GPIO drive strength value is configured via GPIO control registers and have 4 possible configurations: 4mA, 8mA, 12mA, 16mA

Using single RAM memory module with fit-PC4

When single SO-DIMM RAM memory module used it should populate the slot closer to an edge (P7) of the PCB, in order to pass memory initialization process.


Software

Intel I218V and Intel I211-AT driver solution for Windows Server 2012 R2

Template:Intel I218V and Intel I211-AT driver solution for Windows Server 2012 R2

Links