Changes

Jump to: navigation, search

FAQ:IPC2

637 bytes added, 10:51, 1 June 2015
=== Which power supplies can power the IPC2? ===
IPC2 bundle comes with external AC/DC wall power supply, providing unregulated 10–15Vdc input voltage range, 12Vdc nominal. However, any power supply able to supply ~60W from 12Vdc source will be fine.
 
=== IPC2 serial ports ===
IPC2 features three RS232 serial ports, one full signal set and two other 2-wire Tx/Rx signals only.
 
* Port 1 (left): Serial 2-wire com port (SuperIO Controller)
* Port 2 (middle): Serial 2-wire com port (Embedded Controller)
* Port 3 (right): Serial full signal set com port (SuperIO Controller)
 
Notes:
# Operating system can be a factor. We recommend to test the ports under Linux Mint 17 or Windows 7
# The operation can be dependent on devices connected, as the ports are not identical
# The middle port operated by Embedded Controller which is part of Intel architecture is not under Compulab control
 
== Software ==
1,916
edits