Changes

Jump to: navigation, search

FAQ:IPC2

303 bytes added, 07:57, 11 June 2015
/* Hardware */
=== Which power supplies can power the IPC2? ===
IPC2 bundle comes with external AC/DC wall power supply, providing unregulated 10–15Vdc input voltage range, 12Vdc nominal. However, any power supply able to supply ~60W from 12Vdc source will be fine.
 
=== What are power capabilities of IPC2 USB ports? ===
Each VBUS pair supplied via onboard power switch with current limit settings of 2.1A, meaning either each VBUS capable sourcing up to 1.05A in case two bus powered devices connected, or sourcing 2.1A in case single bus powered device connected.
=== IPC2 serial ports ===
* Port 2 (middle): Serial 2-wire com port (Embedded Controller)
* Port 3 (right): Serial full signal set com port (SuperIO Controller)
 
1,916
edits