Changes

Jump to: navigation, search

FAQ:IPC2

482 bytes added, 09:49, 14 February 2016
/* Hardware */
* Port 2 (middle): Serial 2-wire com port (Embedded Controller)
* Port 3 (right): Serial full signal set com port (SuperIO Controller)
 
# Usually 2-wire serial interface uses very basic, relatively slow and not too immune communication but it is very simple to use. Not all devices can communicate via 2-wire serial interface.
# The most reliable RS232 serial communication is the one uses full signal set or at least 4-wire, data (Tx/Rx) and flow control signals (CTS/RTS).
 
=== Pigtail unterminated DC cable ===
Pigtail DC cable - unterminated on one end and on the other uses standard 5.5mm x 2.5mm barrel plug with mechanical twist-lock.<br>
Can be used with IPC2, Intense PC, fit-PC4/3 and fitlet computers.
* [http://www.fit-pc.com/web/products/accessories/fit-pc3-ipc-accessory-kit/ Order from Compulab accessories]
* Order info:
** Compulab PN: 504F010040
** L=150cm, 5.5/2.5 plug diameters, tinned ends, #16AWG
 
[[File:Unterminated-DC-cable.png]]
== Software ==
1,916
edits