Changes

Jump to: navigation, search

FACE Modules:FM-OPLN

366 bytes removed, 13:21, 4 September 2018
== FM-OPLN Module ==
FM-OPLN FACE Module incorporates dual [https://en.wikipedia.org/wiki/Small_form-factor_pluggable_transceiver SFP+ ] fiber optics sockets providing LAN 10/100/1000BASE-T X Ethernet connectivity, compliant with IEEE 802.3/u/ab 3z standard, and two additional USB2.0 downstream ports.<br>
Refer to [[Product to FACE Module compatibility | Compatibility Matrix]] for products fit.
=== Highlights ===
* 2x fiber optics SFP+ GbE LAN 10/100/1000BASE-T X (optic) compliant with IEEE 802.3/u/ab3z
* 2x USB2.0 downstream ports, up to 480Mbps half-duplex
<!--
=== Block Diagram ===
[[File:FM-XTDEU2_4OPLN block diagram.png|700px]]
=== Hardware Specifications ===
The following section provides information about FM-XTDEU2/4 OPLN main components and features.
'''Realtek RTL8111F Intel I210IS GbE Controller'''The Realtek RTL8111F Gigabit Intel Ethernet I210 controller combines is a single port, compact, low power component that supports GbE designs. The I210 offers a triplefully-speed IEEE 802.3 compliant integrated GbE Media Access Controller Control (MAC) with a triple-speed Ethernet transceiver, Physical Layer (PHY) port and supports PCI Express bus controller, and embedded memory2. With state-of-the-art DSP technology and mixed-1 (2.5GT/s mode signal technology, the RTL8111F offers high-speed transmission over CAT 5 UTP cable). The RTL8111F supports PCI Express 1I210 enables 1000BASE-T implementations using an integrated PHY.1 bus interface It can be used for host communications with power managementserver system configurations such as rack mounted or pedestal servers, and in an add-on NIC or LAN on Motherboard (LOM) design. Another possible system configuration is compliant with the IEEE 802.3u specification for 10/100Mbps Ethernet and the IEEE 802.3ab specification for 1000Mbps Ethernetblade servers as a LOM or mezzanine card. It can also supports an auxiliary power auto-detect function, and will auto-configure related bits of the PCI power management registers be used in PCI configuration space. The RTL8111F features embedded Oneapplications such as switch add-Time-Programmable (OTP) memory to replace the external EEPROMon cards and network appliances.Advanced Configuration Power management Interface (ACPI) – power management for modern operating systems that are capable of Operating System-directed Power Management (OSPM) – One independent interface is supported used to achieve connect the most efficient power management possibleI210 port to external devices. In addition to the ACPI feature, remote Wake on LAN The following protocol is supported in both ACPI and APM : MDI (Advanced Power Managementcopper) environmentssupport for standard IEEE 802. The RTL8111F is suitable 3 Ethernet interface for multiple market segments 1000BASE-T, 100BASE-TX, and emerging 10BASE-T applications(802.3, such as desktop, mobile802.3u, workstation, server, communications platforms and embedded applications802.3ab).
'''Main Features'''
*Integrated 10/100/1000 transceiver*Auto-Negotiation with Next Page capability*Supports PCI Express PCIe v2.1(2.1*Supports pair swap5 GT/polarity/skew corrections mode) x1, with Switching Voltage Regulator (iSVR)*Crossover Detection & AutoIntegrated Non-CorrectionVolatile Memory (iNVM)*Wake-on-LAN and remote wake-up supportPlatform Power Efficiency*Supports Full Duplex flow control (* IEEE 802.3x3az Energy Efficient Ethernet (EEE)*Supports jumbo frame to 9K bytes* Proxy: ECMA-393 and Windows logo for proxy offload*Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3abAudio-video bridging*Supports IEEE 802.1P Layer 2 Priority Encoding*Supports IEEE 1588/802.1Q VLAN tagging1AS precision time synchronization*Supports * IEEE 802.3az-2010 1Qav traffic shaper (EEEwith software extensions)*Embedded OTP memory can replace the external EEPROMJumbo frames*Supports power down/link down power saving/PHY disable modeInterrupt moderation, VLAN support, IP checksum offload*BuiltRSS and MSI-X to lower CPU utilization in switching regulatormulti-core systems*Supports Customized LEDs*Supports 1Advanced cable diagnostics, auto MDI-Lane 2.5Gbps PCI Express BusX*Supports hardware ECC (Error Correction Code) function– error correcting memory in packet buffers*Supports hardware CRC Four Software Definable Pins (Cyclic Redundancy CheckSDPs) function*48-pin QFN ‘Green’ package '''IDT ICS9DB102 1-to-2 Differential Clock Driver'''IDT ICS9DB102 is two output clock buffer for PCIe Gen1 & Gen2 with HCSL current mode differential outputs.Device zero-delay buffer supports PCI Express clocking requirements. The ICS9DB102 is driven by a differential compliant input clock. It attenuates jitter on the input clock and has a selectable PLL Band Width to maximize performance in systems with or without Spread-Spectrum clocking.-->
'''Pericom PI6C20400 1-to-4 Differential Clock Driver'''
Pericom Semiconductor's PI6C20400 is a high-speed, low-noise differential clock driver/buffer compatible with CML and HCSL differential I/O technology.
The device distributes a differential input clock to four differential pairs of clock outputs either with or without PLL. The clock outputs are controlled by input selection of several static control signals and Host SMBus interface. The device oriented and designed for PCI Express applications.
=== Schematics ===
=== SW Drivers ===
* [http://fit-pc.com/download/face-modules/fm-opln/sw/fm-opln_windows-drivers.zip Windows 7/8/10 Ethernet driver]
 
* [http://fit-pc.com/download/face-modules/fm-1lan/sw/windows-drivers/fm-1lan-win7_ethernet_drivers_2012.12.04.zip Windows 7 Ethernet driver package]
 
[[Category:Extension boards]]
[[Category:FACE modules]]
1,586
edits