Changes

Jump to: navigation, search
* This application note applies to [[fitlet2 supports CAN if configured ]] with the [http://fit-pc.com/wiki/index.php/Fitlet2_FACET_Cards#FC-SCG FC-SCG FACET]FACET-Card running Linux* It provides an example of how to use the CANbus feature of FC-SCG under Linux* The following application is required for the CAN bus functionality: [https://fit-iot.com/files/download/fitlet2/sw/drivers/Linux/fitlet2-linux-FTDI-CAN-sniffer-master.tar.gz fitlet2 FTDI CAN sniffer]
The following application is required for the ==Simple CAN bus functionality:*[https://fit-iot.com/files/download/fitlet2/sw/drivers/Linux/fitlet2-linux-FTDI-CAN-sniffer-master.tar.gz fitlet2 FTDI CAN sniffer]==
Simple CAN bus sniffer.Purposed Written for the following chain: [https://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT232H.pdf FTDI232H ] <-> [https://www.microchip.com/wwwproducts/en/en010406 MCP2515].<br>
Tested on Linux 4.14.41 (Debian sid)
sniff.static -- statically linked executable
'''Usage:'''
Prints received frames to STDOUT, sends to net frames gotten from STDIN.
Allowed frame to be sent format:
sid:paiload[0...i] sid-eid:paiload[0...i] * where "i " must be less than 8
For more detailed explanation of the mentioned options please read the MCP2515.CAN bus interface chip datasheet:<br>[http://ww1.microchip.com/downloads/en/DeviceDoc/20001801H.pdfMCP2515 CAN bus interface chip datasheet]
[[category: software]]
[[category: Extension boards]]
[[category: application notes]]
1,586
edits