- This application note applies to Airtop3
- It provides BIOS configurations instructions to properly configure the Airtop3 to boot from PXE environment.
Instructions
- Enter the BIOS menu by pressing "ESC" on startup.
- In the BIOS menu, browse to Advanced -> Network Stack Configuration menu.
- Set the Network Stack setting to [Enabled], as a result, additional settings will appear.
- Enable the appropriate functionality. For example: for Ipv4 PXE functionality, set the Ipv4 PXE Support setting to [Enabled].
- Press F4 to save and exit.
- Confirm by entering BIOS menu and checking at Boot tab that the "UEFI PXE" option appears in the boot priorities list.