Difference between revisions of "Application note - Airtop3 configure PXE boot"

From fit-PC wiki
Jump to: navigation, search
Line 7: Line 7:
 
# Set the '''Network Stack setting''' to ['''Enabled'''], as a result, additional settings will appear.
 
# Set the '''Network Stack setting''' to ['''Enabled'''], as a result, additional settings will appear.
 
# Enable the appropriate functionality.
 
# Enable the appropriate functionality.
** <u>For example:</u> for Ipv4 PXE functionality, set the '''Ipv4 PXE Support''' setting to ['''Enabled'''].
+
<u>For example:</u> for Ipv4 PXE functionality, set the '''Ipv4 PXE Support''' setting to ['''Enabled'''].
 
# Press '''F4''' to save and exit.
 
# Press '''F4''' to save and exit.
 
# Confirm by entering BIOS menu and checking at '''Boot''' tab that the "'''UEFI PXE'''" option appears in the boot priorities list.
 
# Confirm by entering BIOS menu and checking at '''Boot''' tab that the "'''UEFI PXE'''" option appears in the boot priorities list.

Revision as of 13:33, 17 November 2019

  • This application note applies to Airtop3
  • It provides BIOS configurations instructions to properly configure the Airtop3 to boot from PXE environment.

Instructions

  1. Enter the BIOS menu by pressing "ESC" on startup.
  2. In the BIOS menu, browse to Advanced -> Network Stack Configuration menu.
  3. Set the Network Stack setting to [Enabled], as a result, additional settings will appear.
  4. Enable the appropriate functionality.
For example: for Ipv4 PXE functionality, set the Ipv4 PXE Support setting to [Enabled].
  1. Press F4 to save and exit.
  2. Confirm by entering BIOS menu and checking at Boot tab that the "UEFI PXE" option appears in the boot priorities list.