Difference between revisions of "Application note - Airtop3 configure PXE boot"
From fit-PC wiki
Line 8: | Line 8: | ||
# Enable the appropriate functionality. (<u>For example:</u> for Ipv4 PXE functionality, set the '''Ipv4 PXE Support''' setting to ['''Enabled''']). | # Enable the appropriate functionality. (<u>For example:</u> for Ipv4 PXE functionality, set the '''Ipv4 PXE Support''' setting to ['''Enabled''']). | ||
# Press '''F4''' to save and exit. | # Press '''F4''' to save and exit. | ||
− | # Confirm by entering BIOS menu and checking at '''Boot''' tab that | + | # Confirm by entering BIOS menu and checking at '''Boot''' tab that "'''UEFI PXE'''" option appears in the boot priorities list. |
Revision as of 13:34, 17 November 2019
- This application note applies to Airtop3
- It provides BIOS configurations instructions to properly configure the Airtop3 to boot from PXE environment.
Instructions
- Enter the BIOS menu by pressing "ESC" on startup.
- In the BIOS menu, browse to Advanced -> Network Stack Configuration menu.
- Set the Network Stack setting to [Enabled], as a result, additional settings will appear.
- Enable the appropriate functionality. (For example: for Ipv4 PXE functionality, set the Ipv4 PXE Support setting to [Enabled]).
- Press F4 to save and exit.
- Confirm by entering BIOS menu and checking at Boot tab that "UEFI PXE" option appears in the boot priorities list.