Changes

Jump to: navigation, search

Airtop3 I3M firmware update

1 byte added, 14:58, 31 December 2019
/* Updating the firmware */
#Plug the prepared USB drive into the target Airtop3.
#Hold the left and right buttons on the I<sup>3</sup>M and plug in the power supply. Keep holding the buttons until the I<sup>3</sup>M reports it is in ''bootloader'' mode.
#Reboot and enter BIOS menu by pressing '''[F2ESC]''' repeatedly upon startup
#Navigate to boot tab and '''[Enable]''' UEFI internal shell
#Navigate to Save&exit tab to save changes & exit.
1,586
edits