Changes
Created page with "* This guide instructs how to configure Intel AMT on Airtop3 '''AMT configuration''' 1. Enter BIOS menu by pressing ['''ESC'''] on startup 2. Navigate to "'''Boot'''" Tab and..."
* This guide instructs how to configure Intel AMT on Airtop3
'''AMT configuration'''
1. Enter BIOS menu by pressing ['''ESC'''] on startup
2. Navigate to "'''Boot'''" Tab and set "'''Built-In UEFI shell'''" to ['''Enabled''']
3. Navigate to "Save & Exit" Tab, and choose Save and Exit option.
4. right after the machine reboots, press CTRL+P at the splash screen to enter MEBx BIOS.<br>
5. Enter AMT configuration settings, you'll be prompted to enter a password.<br>
6. Change the default password. The default password is "admin". The new password has the comply with the following policies:<br>
* At least 8 characters
* At least one digit character (eg. 0, 1, … 9)
* At least one non-alpha-numeric character (e.g. !, $, ;) excluding colon, comma or quotes.
* At least one lower-case letter (a, b, c, d...)
* At least one upper case letter (A, B, C, D,...)
'''Optional:''' The AMT system uses DHCP to configure an IP Address.
* If you do not have a DHCP server you can configure a static IP within Intel AMT Configuration > Network Setup > TCP/IP Settings.
4. After completing network configuration the Web interface should be available at port 16992 (http://<IP>:16992/). Log in once to verify that it is available and properly configured.
[[Category: Airtop3]]
[[Category: application notes]]
'''AMT configuration'''
1. Enter BIOS menu by pressing ['''ESC'''] on startup
2. Navigate to "'''Boot'''" Tab and set "'''Built-In UEFI shell'''" to ['''Enabled''']
3. Navigate to "Save & Exit" Tab, and choose Save and Exit option.
4. right after the machine reboots, press CTRL+P at the splash screen to enter MEBx BIOS.<br>
5. Enter AMT configuration settings, you'll be prompted to enter a password.<br>
6. Change the default password. The default password is "admin". The new password has the comply with the following policies:<br>
* At least 8 characters
* At least one digit character (eg. 0, 1, … 9)
* At least one non-alpha-numeric character (e.g. !, $, ;) excluding colon, comma or quotes.
* At least one lower-case letter (a, b, c, d...)
* At least one upper case letter (A, B, C, D,...)
'''Optional:''' The AMT system uses DHCP to configure an IP Address.
* If you do not have a DHCP server you can configure a static IP within Intel AMT Configuration > Network Setup > TCP/IP Settings.
4. After completing network configuration the Web interface should be available at port 16992 (http://<IP>:16992/). Log in once to verify that it is available and properly configured.
[[Category: Airtop3]]
[[Category: application notes]]
