Difference between revisions of "Airtop2 running on embedded GPU is flickering/bad display on Linux"
From fit-PC wiki
(Created page with "* The following document applies to Airtop2 running Linux, with embedded display output. * The solution has been tested on the following system: Device: Airtop2 CPU: Intel(R...") (change visibility) |
(No difference)
|
Revision as of 09:19, 6 January 2019
- The following document applies to Airtop2 running Linux, with embedded display output.
- The solution has been tested on the following system:
Device: Airtop2 CPU: Intel(R) Xeon(R) CPU E3-1275 v6 BIOS: 04/17/2018 American Megatrends Inc. 5.12_ATOP2.PRD.0.45.2 EFI OS: Linux Mint 19 Tara Kernel: 4.15.0-23-generic
Instructions:
- Add kernel parameter "intel_idle.max_cstate=4" to the kernel boot line.
- Edit /etc/default/grub as root, for example: sudo nano /etc/default/grub - Add intel_idle.max_cstate=4, it should look like this: GRUB_CMDLINE_LINUX="intel_idle.max_cstate=4" - Save the file and close the editor - Run sudo update-grub2 to regenerate the grub config files
If you need to boot from LiveUSB you will need to add "intel_idle.max_cstate=4" to the kernel boot line manually. For example on LinuxMint you need to press "e" to edit kernel boot line from the GRUB menu.