Last modified on 14 March 2018, at 14:46

Airtop2 Troubleshooting

Airtop2 BIOS reset:

  1. Power down the PC and unplug the power cable.
  2. Open the service door.
  3. Remove the disks cartridge.
  4. Reset the BIOS by pressing the low profile push button SW4 (RTC_RST).
  5. Mount the disks cartridge and close the door.
  6. Plug the power and power up the PC (either auto-on or pressing power button).

options

Check memory (RAM)

Verify RAM modules are installed. The system will not boot without it.

Check storage (HDD/SSD):

Verify power up without storage. Sometimes damaged drives may cause the overall system to malfunction.

Check power supply (PSU):

  • Verify the power supply is not damaged and functions properly.
  • If you have another power supply use it to eliminate and determine the failing side.
  • In case you use other power supply make sure it provides uninterrupted power and stable grounding.