Difference between revisions of "Airtop2 Troubleshooting"

From fit-PC wiki
Jump to: navigation, search
(I can't turn on the computer, it doesn't wake up?)   (change visibility)
 
(31 intermediate revisions by one other user not shown)
Line 1: Line 1:
===I can't turn on the computer, it doesn't wake up?===
+
===[https://fit-pc.com/wiki/index.php?title=Airtop2_Troubleshooting_-_I_can%27t_turn_on_the_computer,_it_doesn%27t_wake_up <span style="color:green">I can't turn on the computer, it doesn't wake up</span>] ===
'''1. Airtop2 BIOS reset'''
+
*Power down the PC and unplug the power cable.
+
*Open the service door.
+
*Remove the disks cartridge.
+
*Reset the BIOS by pressing the low profile push button SW1 (RTC_RST).
+
*Mount the disks cartridge and close the door.
+
*Plug the power and power up the PC (either auto-on or pressing power button).
+
  
[[File:Airtop2-bios-reset.gif]]
+
===[https://fit-pc.com/wiki/index.php?title=Airtop2_with_Linux_starts_up_with_flickering/bad_display <span style="color:green">Airtop2 with Linux starts up with flickering/bad display</span>] ===
  
'''2. Check memory (RAM)'''
+
===[https://fit-pc.com/wiki/index.php?title=Airtop2_Troubleshooting_-_I_don%27t_have_any_display_output,_there%27s_nothing_on_the_screen <span style="color:green">I don't have any display output, there's nothing on the screen</span>] ===
*Verify RAM modules are installed. The system will not boot without it.
+
  
'''3. Check storage (HDD/SSD)'''
 
*Verify power up without storage. Sometimes damaged drives may cause the overall system to malfunction.
 
  
'''4. Check power supply (PSU)'''
 
*Verify the power supply is not damaged and functions properly.
 
*If you have another power supply use it to eliminate and determine the failing side.
 
*In case you use other power supply make sure it provides uninterrupted power and stable grounding.
 
  
==Airtop2 BIOS reset:==
+
[[Category:Airtop2]]
*Power down the PC and unplug the power cable.
+
*Open the service door.
+
*Remove the disks cartridge.
+
*Reset the BIOS by pressing the low profile push button SW1 (RTC_RST).
+
*Mount the disks cartridge and close the door.
+
*Plug the power and power up the PC (either auto-on or pressing power button).
+
 
+
[[File:Airtop2-bios-reset.gif]]
+
 
+
==Check memory (RAM)==
+
*Verify RAM modules are installed. The system will not boot without it.
+
 
+
==Check storage (HDD/SSD):==
+
*Verify power up without storage. Sometimes damaged drives may cause the overall system to malfunction.
+
 
+
==Check power supply (PSU):==
+
*Verify the power supply is not damaged and functions properly.
+
*If you have another power supply use it to eliminate and determine the failing side.
+
*In case you use other power supply make sure it provides uninterrupted power and stable grounding.
+

Latest revision as of 10:37, 20 May 2020

I can't turn on the computer, it doesn't wake up

Airtop2 with Linux starts up with flickering/bad display

I don't have any display output, there's nothing on the screen