Changes
Created page with "* This application note applies to Airtop2 configured with discrete GPU. * It provides instructions on how to enable the on-board display outputs. * In the Airtop2 configured..."
* This application note applies to Airtop2 configured with discrete GPU.
* It provides instructions on how to enable the on-board display outputs.
* In the Airtop2 configured with discrete GPU, by default the primary display setting is set to [Auto], disabling the on-board display outputs.
* In order to be able to use all display outputs, the iGFX needs to be configured as primary.
* This way, the discrete GPU is recognized as a standard PCI device, co-existing with the iGFX.
==Instructions==
# Press ['''DEL'''] on startup to load the BIOS menu.
# Enter '''Chipset Menu'''
## Navigate to --> SA configuration --> Graphics configuration
## Pick ['''Primary Display'''] and Choose ['''IGFX'''].
[category: Airtop2]
[category: application note]
* It provides instructions on how to enable the on-board display outputs.
* In the Airtop2 configured with discrete GPU, by default the primary display setting is set to [Auto], disabling the on-board display outputs.
* In order to be able to use all display outputs, the iGFX needs to be configured as primary.
* This way, the discrete GPU is recognized as a standard PCI device, co-existing with the iGFX.
==Instructions==
# Press ['''DEL'''] on startup to load the BIOS menu.
# Enter '''Chipset Menu'''
## Navigate to --> SA configuration --> Graphics configuration
## Pick ['''Primary Display'''] and Choose ['''IGFX'''].
[category: Airtop2]
[category: application note]
