Last modified on 10 December 2019, at 07:58

Airtop2 - Enable internal graphics display outputs

  • This application note applies to Airtop2 configured with discrete GPU.
  • It provides instructions on how to enable the on-board display outputs.
  • In the Airtop2 configured with discrete GPU, by default, the primary display setting is set to [Auto], disabling the on-board display outputs.
  • In order to be able to use all display outputs, the iGFX needs to be configured as primary.
  • This way, the discrete GPU is recognized as a standard PCI device, co-existing with the iGFX.

Instructions

  1. Press [DEL] on startup to load the BIOS menu.
  2. Enter Chipset Menu
    1. Navigate to --> SA configuration --> Graphics configuration
    2. Pick [Primary Display] and Choose [IGFX].