Changes
/* Windows */
The Link Power Management option is default in the Advanced Power option of Windows:
# Adding the AHCI Link Power Management – HIPM/DIPM option to Advanced Power Settings.
## Download the [http://fit-pc.com/download/app-notes/ahci-link-power-management/Add_LPM.reg fileAdd_LPM.reg]## Right click on the downloaded '''Add_LPM.reg ''' file and click on Merge.
## After the success message appears, restart the unit.
# Removing the AHCI Link Power Management – HIPM/DIPM option from Advanced Power Settings.
## Download the [http://fit-pc.com/download/app-notes/ahci-link-power-management/Remove_LPM.reg fileRemove_LPM.reg]## Right click on the downloaded '''Remove_LPM.reg ''' file and click on Merge.
## After the success message appears, restart the unit.
# Configuring the AHCI Link Power Management – HIPM/DIPM option in the Advanced Power Settings.
:::::** Lowest:HIPM, DIPM and DEVSLP are allowed (if DEVSLP is supported by the storage device).
:::::* AHCI Link Power Management – Adaptive. It will set the period of AHCI link idle time before the link is put in the slumber state when you have HIPM, DIPM, HIPM+DIPM or Lowest set above. It can be set to be from 0 to 300,000 milliseconds. If the Active is set above, then this will have no effect.
=== Linux ===
