Difference between revisions of "Airtop2 BIOS Update"
From fit-PC wiki
(→Updating BIOS) (change visibility) |
(→Preparing the USB Flash Drive with BIOS Updater) (change visibility) |
||
Line 12: | Line 12: | ||
# Download and extract the '''[http://fit-pc.com/download/airtop2/bios/tools/AFUEFI_BIOS_Updater_Package.zip Bios Updater package]'''.<p>The package contains the following files:</p> | # Download and extract the '''[http://fit-pc.com/download/airtop2/bios/tools/AFUEFI_BIOS_Updater_Package.zip Bios Updater package]'''.<p>The package contains the following files:</p> | ||
#:''AfuEfix64.efi'' | #:''AfuEfix64.efi'' | ||
− | |||
#:''Shellx64.efi'' | #:''Shellx64.efi'' | ||
#:''Startup.nsh'' | #:''Startup.nsh'' |
Revision as of 08:49, 27 February 2019
Follow us on Twitter for software and BIOS updates
- This page contains information on how to update the Airtop2 firmware.
Important:
* BIOS update recommended in case the system is unstable, or required fixes have been released. * Incorrect BIOS update has a risk for system brick, therefore follow the guide step-by-step.
The following procedure suitable Airtop2 computers equipped with Intel KabyLake processors.
Preparing the USB Flash Drive with BIOS Updater
- Connect your USB Flash Drive (UFD) to your computer and format it to FAT32 file system
- Download and extract the Bios Updater package.
The package contains the following files:
- AfuEfix64.efi
- Shellx64.efi
- Startup.nsh
- Copy the extracted files to the prepared UFD
- Download the Airtop2 BIOS file
- Copy the BIOS file to the root directory on the prepared UFD
Updating BIOS
- Connect the prepared UFD to the target Airtop2 and power up
- Press the DEL key during the boot until the BIOS Setup appears
- Browse to the Save & Exit menu
- Click on the Launch EFI Shell from filesystem device option
- The system will boot to the EFI Shell and after 4 seconds the automatic script will start
- Please do not press ESC while the countdown
- The script will find the Storage Device with BIOS update application
- Type the following command: flash artp2.cap and press the Enter key
- The BIOS flashing process will start
- When the process ends and the prompt line appears, type the command: reset and press the Enter key.