Difference between revisions of "Airtop2 Troubleshooting"

From fit-PC wiki
Jump to: navigation, search
(Created page with "===Airtop2 BIOS reset:=== # Power down the PC and unplug the power cable. # Open the service door. # Remove the disks cartridge. # Reset the BIOS by pressing the low profile p...")   (change visibility)
 
Line 6: Line 6:
 
# Mount the disks cartridge and close the door.
 
# Mount the disks cartridge and close the door.
 
# Plug the power and power up the PC (either auto-on or pressing power button).
 
# Plug the power and power up the PC (either auto-on or pressing power button).
[[File:Airtop2-bios-reset.gif|options|caption]]
+
[[File:Airtop2-bios-reset.gif|border|750px]]
  
 
===Check memory (RAM)===
 
===Check memory (RAM)===
Line 15: Line 15:
  
 
===Check power supply (PSU):===
 
===Check power supply (PSU):===
* Verify the power supply is not damaged and functions properly.
+
*Verify the power supply is not damaged and functions properly.
 
*If you have another power supply use it to eliminate and determine the failing side.
 
*If you have another power supply use it to eliminate and determine the failing side.
 
*In case you use other power supply make sure it provides uninterrupted power and stable grounding.
 
*In case you use other power supply make sure it provides uninterrupted power and stable grounding.

Revision as of 14:45, 14 March 2018

Airtop2 BIOS reset:

  1. Power down the PC and unplug the power cable.
  2. Open the service door.
  3. Remove the disks cartridge.
  4. Reset the BIOS by pressing the low profile push button SW4 (RTC_RST).
  5. Mount the disks cartridge and close the door.
  6. Plug the power and power up the PC (either auto-on or pressing power button).

Airtop2-bios-reset.gif

Check memory (RAM)

Verify RAM modules are installed. The system will not boot without it.

Check storage (HDD/SSD):

Verify power up without storage. Sometimes damaged drives may cause the overall system to malfunction.

Check power supply (PSU):

  • Verify the power supply is not damaged and functions properly.
  • If you have another power supply use it to eliminate and determine the failing side.
  • In case you use other power supply make sure it provides uninterrupted power and stable grounding.