What is the trick to get line audio out from fit-pc2i? I have tried all possible drivers, also native Realtek ALC662 drivers. I have tried also other HW and no help.
Windows show that audio is going to speakers, but nothing come out.
win7 and audio line out
Re: win7 and audio line out
Have you tried here?
http://www.fit-pc2.com/download/win7-drivers/
http://www.fit-pc2.com/download/win7-drivers/
Re: win7 and audio line out
Yes, I have. That driver does not recognize when I plug in line out cable and speaker is then disabled. There is updated driver at realtek support page and that enable speaker, but nothing come out.irads wrote:Have you tried here?
http://www.fit-pc2.com/download/win7-drivers/
Re: win7 and audio line out
i have tried this. does not work.
Re: win7 and audio line out
This could be a hardware problem or misconfiguration.
You can double check that the speakers are functional and that they are plugged into the correct jack.
You may try audio with Linux (can boot from a thumb drive without installation).
If the fit-PC2i is under warranty you may consider an RMA.
Sorry for the inconvenience.
You can double check that the speakers are functional and that they are plugged into the correct jack.
You may try audio with Linux (can boot from a thumb drive without installation).
If the fit-PC2i is under warranty you may consider an RMA.
Sorry for the inconvenience.
Re: win7 and audio line out
Hi,
this was HW issue. Two first HW had not working line out. Now I have third HW and this one has audio.
Great, now I can get into real project with this one to build SDR radio.
Mika
this was HW issue. Two first HW had not working line out. Now I have third HW and this one has audio.
Great, now I can get into real project with this one to build SDR radio.
Mika