Hello Everyone,
I have been trying to use intense pc motherboard in a different case for a project which require features of SBC-ISB + some other feature. Found that SBC-ISB does not have a front panel like regular boards, for connecting with the power button, reset button, hdd lead of Case.
So, we need to know how can we use SBC-ISB in different case? Please help.
intense pc front panel
Re: intense pc front panel
IPC front panel doesn't have power or reset buttons. BTW all of them available on the SBC.
What do you specifically need to achieve?
What do you specifically need to achieve?
Re: intense pc front panel
As I said we need to use intense pc board in different case. We were
having difficulty to install different case's power switch. However, we got a technician to do that
wiring power button cable beside intense pc switch.
We also need a pcie card installed and worked inside new case with intense board. We have used a mini pcie converter on mini pcie . This converter require to provide current from fdd/molex connector. It works if we provide current from different pc's fdd/sata power port. We have splitted sata power from sata connector but our pcie does not works. We have found 12v current is not available in sata port/connector of intense board. To populate sata/fdd power we have two ground and a 5V from sata connector but without having 12v our pcie not going to work. Can you please help us to find a 12v source from intense pc board which can be used easily?
having difficulty to install different case's power switch. However, we got a technician to do that
wiring power button cable beside intense pc switch.
We also need a pcie card installed and worked inside new case with intense board. We have used a mini pcie converter on mini pcie . This converter require to provide current from fdd/molex connector. It works if we provide current from different pc's fdd/sata power port. We have splitted sata power from sata connector but our pcie does not works. We have found 12v current is not available in sata port/connector of intense board. To populate sata/fdd power we have two ground and a 5V from sata connector but without having 12v our pcie not going to work. Can you please help us to find a 12v source from intense pc board which can be used easily?
Re: intense pc front panel
Please refer to FACE module HW spec:
http://www.fit-pc.com/wiki/index.php/FA ... umentation
You may find both 12V and 5V on its connectors.
http://www.fit-pc.com/wiki/index.php/FA ... umentation
You may find both 12V and 5V on its connectors.