Page 1 of 1

VGA (or lack thereof)

Posted: Fri May 25, 2012 6:20 am
by evaguy
I see in the specifications that the fit-PC3 has HDMI and Displayport, but no mention of VGA. Is it possible to use a Displayport to VGA adapter? If so, is 800x600 a possible resolution? My special application requires that specific resolution. Thanks! :D

Re: VGA (or lack thereof)

Posted: Fri Jun 01, 2012 7:23 am
by gabrielh
You can use FitPC3 with a FitVGA adapter under Windows 7 environment

Re: VGA (or lack thereof)

Posted: Tue Jun 12, 2012 1:28 am
by Takenaka
Where can I get the FitVGA adapter for VGA monitor? Thanks.

Re: VGA (or lack thereof)

Posted: Tue Jun 12, 2012 6:33 am
by prpixel
Amazon.com

Re: VGA (or lack thereof)

Posted: Thu Jun 14, 2012 11:44 am
by gabrielh
Please contact sales@compulab.co.il

Re: VGA (or lack thereof)

Posted: Wed Nov 28, 2012 6:08 pm
by Andy
Hi there,

fit-PC 3 comes with an HDMI to DVI adaptor, so is it not possible to just extend the supplied adaptor with a DVI to VGA adaptor such as the one shown in the attatched image?

HDMI --> DVI --> VGA

Re: VGA (or lack thereof)

Posted: Thu Dec 06, 2012 11:31 am
by gabrielh
From this picture I can't tell if will suite or not. The adapter should convert a digital (HDMI/DVI) to an analog (VGA) signal. If this is only a mechanical adapter, then it will not work.

Re: VGA (or lack thereof)

Posted: Wed Feb 13, 2013 5:12 pm
by ilia
Our customer wants to connect the Fit-PC3 video to the KVM switch they have.
Unfortunately, this switch supports only the VGA(analog) video input from the PC - not any kind of digital input the Fit-PC3 provides.

Can you suggest some solution for this?
I.e. some digital to analog conversion dongle which can provide the VGA signal to the switch?

The mentioned Fit-PC3 runs Linux - the stock Linux Mint witch is came with the product. If the stock Linux driver does not supports such a setup, can you advice of the needed tweakings?

Thanks.
Ilia.

Re: VGA (or lack thereof)

Posted: Thu Feb 14, 2013 1:45 pm
by gabrielh
You can consider to buy one of those DP adapters. They are suitable with Fit-PC3 .