Yeah sure, I had some problems with it initially, but I have had similar problems with other AMD chipset installations. And, to prove a point, I installed Windows 8, rather than Windows 7. Recently, I changed over from a laptop 2.5" ssd drive that claimed SATA3 to a mini-pciexpress ssd card that began to work when I changed the bios to sata2 for the pciexpress hard drive.
To tell the truth, setting the "power options" to "performance" is exciting, because then Windows 8 shuttles the cpus up to 1.28 ghz, while claiming a 1 ghz maximum. You might say, the base bargain model gets jet propelled with these two minor changes. Or, if you prefer a really cool case, and I do, you can set the power options to "powersave", and it still works.
Also, experience from other AMD system installations indicated that the Compulab Windows 7 fit-pc3 graphics driver would work fine in Windows 8, and it does. You can do without it, but, if you want a custom resolution, say, for your television set, you need the Compulab driver. Reason: The generic driver only does full screen at full resolution. The Compulab AMD driver adds a box you can check to make lesser resolutions full screen.
I'll have to post this elsewhere as well: If you want to trim your laptop or mini-pcie ssd drive in Linux, you do 'fstrim /' while in administrator mode. Yes, folks, there is an ext3/ext4 trim program for Linux. And, all of a sudden, large programs leap to the screen with the mini-pcie ssd drive after trimming.
My base fit-pc3 works in Windows 8, rather well in fact
Return to “fit-PC3 faults and troubleshooting”
Jump to
- Announcements
- ↳ Read me first
- ↳ News
- ↳ Ordering
- Tensor-PC
- ↳ General Tensor-PC questions
- ↳ Tensor-PC Hardware
- ↳ Tensor-PC Software
- fitlet3
- ↳ General fitlet3 questions
- ↳ fitlet3 hardware
- ↳ fitlet3 software
- ↳ fitlet3 FACET Cards
- Airtop3
- ↳ General Airtop3 questions
- ↳ Airtop3 Hardware
- ↳ Airtop3 Software
- ↳ Airtop3 I3M
- fitlet2 and MBM2
- ↳ General fitlet2 questions
- ↳ fitlet2 hardware
- ↳ fitlet2 software
- ↳ fitlet2 FACET Cards
- ↳ Cool stuff with fitlet2
- Airtop2
- ↳ General Airtop2 questions
- ↳ Airtop2 Software
- ↳ Airtop2 Hardware
- ↳ Airtop2 I3M
- Mature products
- ↳ Airtop
- ↳ General Airtop questions
- ↳ I3M
- ↳ IPC2 (Intense PC2)
- ↳ General IPC2 questions
- ↳ IPC2 availability
- ↳ IPC2 Hardware
- ↳ Linux on IPC2
- ↳ Windows on IPC2
- ↳ Other operating systems on IPC2
- ↳ IPC2 BIOS
- ↳ IPC2 faults and troubleshooting
- ↳ Intense PC and MintBox 2
- ↳ General Intense PC questions
- ↳ Intense PC hardware
- ↳ CPU & Chipset
- ↳ Display interface
- ↳ Memory
- ↳ Storage
- ↳ Ethernet
- ↳ WLAN and miniPCI-e
- ↳ Audio
- ↳ USB
- ↳ Power and heat
- ↳ Linux on Intense PC
- ↳ Linux Mint
- ↳ Other distributions
- ↳ Windows on Intense PC
- ↳ Win7 on Intense PC
- ↳ Win8 on Intense PC
- ↳ Audio
- ↳ Intense PC BIOS
- ↳ Android on Intense PC
- ↳ Intense PC faults and troubleshooting
- ↳ fitlet and MintBox Mini
- ↳ General fitlet questions
- ↳ fitlet performance
- ↳ fitlet hardware
- ↳ Memory
- ↳ Storage
- ↳ Power and heat
- ↳ Mechanical
- ↳ fitlet BIOS
- ↳ Linux on MintBox Mini / Linux on fitlet
- ↳ Windows on fitlet
- ↳ Other operating systems on fitlet
- ↳ FACET Cards
- ↳ fitlet compatible devices
- ↳ Cool stuff with fitlet
- ↳ fitlet faults and troubleshooting
- ↳ fit-PC4
- ↳ General fit-PC4 questions
- ↳ fit-PC4 hardware
- ↳ Windows on fit-PC4
- ↳ Linux on fit-PC4
- ↳ Other operating systems on fit-PC4
- ↳ fit-PC4 BIOS
- ↳ fit-PC4 faults and troubleshooting
- ↳ fit-PC3
- ↳ General fit-PC3 questions
- ↳ fit-PC3 hardware
- ↳ Display interface
- ↳ Storage
- ↳ Audio
- ↳ WLAN and miniPCI-e
- ↳ USB
- ↳ Power and Heat
- ↳ Ethernet
- ↳ Windows on fit-PC3
- ↳ Linux on fit-PC3
- ↳ Other operating systems on fit-PC3
- ↳ fit-PC3 BIOS
- ↳ fit-PC3 accessories
- ↳ Using fit-PC3
- ↳ fit-PC3 faults and troubleshooting
- ↳ fit-PC2
- ↳ General fit-PC2 questions
- ↳ Buying fit-PC2
- ↳ Linux on fit-PC2
- ↳ Linux Mint
- ↳ Ubuntu 9.10
- ↳ Ubuntu 10.04
- ↳ Ubuntu 10.10
- ↳ Ubuntu 11.04
- ↳ Other Linux distributions
- ↳ Ubuntu 8.04
- ↳ Ubuntu 9.04
- ↳ Display driver
- ↳ Multimedia in Linux
- ↳ Multimedia in Mint
- ↳ Windows on fit-PC2
- ↳ Windows 7
- ↳ Windows 7 display driver
- ↳ Audio in Win7
- ↳ Windows XP
- ↳ XP installation
- ↳ Display driver
- ↳ Video playback
- ↳ Audio in XP
- ↳ Other Windows versions
- ↳ Other operating systems on fit-PC2
- ↳ FreeBSD
- ↳ fit-PC2 hardware
- ↳ fit-PC2i hardware
- ↳ Display interface
- ↳ Storage
- ↳ Audio
- ↳ WLAN and miniPCI-e
- ↳ USB
- ↳ Auto-ON
- ↳ Power and Heat
- ↳ Ethernet
- ↳ RTC & System clock
- ↳ fit-PC2 BIOS
- ↳ BIOS updates fit-PC2
- ↳ BIOS updates fit-PC2i
- ↳ fit-PC2 accessories
- ↳ Using fit-PC2
- ↳ HTPC
- ↳ Server
- ↳ Control
- ↳ Verified displays
- ↳ Car PC
- ↳ fit-PC1 questions
- ↳ fit-PC Slim questions
- ↳ uSVR
- ↳ General uSVR questions
- ↳ IPC3
- ↳ General IPC3 questions
- ↳ IPC3 Software
- ↳ IPC3 Hardware
- ↳ FACE modules
- ↳ FACE Modules
- ↳ General FACE Module questions
- Compulab accessories
- ↳ fit-Headless and fit-Headless 4K
- ↳ fit-Uptime
- ↳ fit-statUSB
- ECN/PCN
- ↳ fitlet3 ECN/PCN
- ↳ Tensor-I20 ECN/PCN
- ↳ Tensor-I22 ECN/PCN
- ↳ fitlet2 ECN/PCN
- ↳ Airtop3 ECN/PCN
- ↳ IPC3 ECN
- ↳ fitlet1 ECN
- ↳ IPC2 ECN
- ↳ IPC1 ECN
- ↳ Airtop2 ECN
- ↳ Airtop1 ECN
- ↳ fit-PC4 ECN
- ↳ fit-PC3 ECN
- ↳ fit-PC2 ECN
- ↳ FACE Modules ECN
- ↳ FACET Cards ECN
- Wish list
- ↳ Addressed requests