Hello, I have:
Kernel 3.14.47 + grsec + Pax
[ 26.060035] ------------[ cut here ]------------
[ 26.060060] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:264 dev_watchdog+0x1c5/0x1d0()
[ 26.060066] NETDEV WATCHDOG: enp3s0 (r8169): transmit queue 0 timed out
[ 26.060069] Modules linked in:
[ 26.060082] CPU: 0 PID: 0 Comm: swapper Not tainted 3.14.99 #1
[ 26.060088] Hardware name: CompuLab CM-iAM/SBC-FITPC2i/CM-iAM/SBC-FITPC2i, BIOS NAPA0001.86C.0000.D.1009141059 09/14/2010
[ 26.060093] 00444915 000373b6 cfd0cc44 f680df48 00000000 cfd06032 00000108 003741b5
[ 26.060111] 003741b5 f69e8000 00006d5a 00000000 ffffffe6 00037404 00000009 f680df30
[ 26.060128] cfd0cc44 f680df48 003741b5 cfd06032 00000108 cfd0cc44 f69e8000 cfcfd3e6
[ 26.060145] Call Trace:
[ 26.060162] [<00444915>] ? dump_stack+0xa/0x13
[ 26.060176] [<000373b6>] ? warn_slowpath_common+0x76/0x90
[ 26.060187] [<003741b5>] ? dev_watchdog+0x1c5/0x1d0
[ 26.060196] [<003741b5>] ? dev_watchdog+0x1c5/0x1d0
[ 26.060208] [<00006d5a>] ? smp_irq_work_interrupt+0xa/0x30
[ 26.060219] [<00037404>] ? warn_slowpath_fmt+0x34/0x40
[ 26.060229] [<003741b5>] ? dev_watchdog+0x1c5/0x1d0
[ 26.060239] [<00373ff0>] ? dev_graft_qdisc+0x60/0x60
[ 26.060250] [<00040842>] ? call_timer_fn.isra.44+0x12/0x70
[ 26.060261] [<000230be>] ? smp_apic_timer_interrupt+0x2e/0x40
[ 26.060273] [<00448601>] ? ret_from_exception+0x21/0x28
[ 26.060284] [<000409a6>] ? run_timer_softirq+0x106/0x180
[ 26.060295] [<0003aa57>] ? __do_softirq+0xe7/0x230
[ 26.060307] [<00200000>] ? pci_mmap_fits+0x50/0x50
[ 26.060318] [<0003a970>] ? __hrtimer_tasklet_trampoline+0x20/0x20
[ 26.060328] [<000048f0>] ? do_softirq_own_stack+0x20/0x40
[ 26.060332] <IRQ> [<0003ad3d>] ? irq_exit+0x7d/0x90
[ 26.060351] [<000046c8>] ? do_IRQ+0x38/0xc0
[ 26.060360] [<00200002>] ? __LOAD_PHYSICAL_ADDR+0x2/0xa0
[ 26.060370] [<00200002>] ? __LOAD_PHYSICAL_ADDR+0x2/0xa0
[ 26.060381] [<00449138>] ? common_interrupt+0x38/0x3d
[ 26.060393] [<00060068>] ? __rt_mutex_adjust_prio+0x28/0x40
[ 26.060406] [<00312db8>] ? cpuidle_enter_state+0x38/0xc0
[ 26.060416] [<00200202>] ? pci_mmap_resource.isra.14+0x162/0x1a0
[ 26.060427] [<00312eb2>] ? cpuidle_idle_call+0x72/0x100
[ 26.060439] [<0000ae25>] ? arch_cpu_idle+0x5/0x20
[ 26.060449] [<00064a28>] ? cpu_startup_entry+0x68/0x120
[ 26.060461] [<0008f800>] ? perf_event_alloc+0x270/0x380
[ 26.060470] [<00e00aaf>] ? 0xe00aae
[ 26.060478] [<00e00569>] ? 0xe00568
[ 26.060488] [<00020800>] ? request_microcode_fw+0x70/0x90
[ 26.060493] ---[ end trace 389554279cf1eb26 ]---
Crash into ethernet module
-
- Posts: 26
- Joined: Tue Jul 20, 2010 7:12 pm
Crash into ethernet module
Post by alpha_one_x86 »
My project for do file copy: http://ultracopier.first-world.info/
Jump to
- Announcements
- ↳ Read me first
- ↳ News
- ↳ Ordering
- Tensor-PC
- ↳ General Tensor-PC questions
- ↳ Tensor-PC Hardware
- ↳ Tensor-PC Software
- fitlet3
- ↳ General fitlet3 questions
- ↳ fitlet3 hardware
- ↳ fitlet3 software
- ↳ fitlet3 FACET Cards
- Airtop3
- ↳ General Airtop3 questions
- ↳ Airtop3 Hardware
- ↳ Airtop3 Software
- ↳ Airtop3 I3M
- fitlet2 and MBM2
- ↳ General fitlet2 questions
- ↳ fitlet2 hardware
- ↳ fitlet2 software
- ↳ fitlet2 FACET Cards
- ↳ Cool stuff with fitlet2
- Airtop2
- ↳ General Airtop2 questions
- ↳ Airtop2 Software
- ↳ Airtop2 Hardware
- ↳ Airtop2 I3M
- Mature products
- ↳ Airtop
- ↳ General Airtop questions
- ↳ I3M
- ↳ IPC2 (Intense PC2)
- ↳ General IPC2 questions
- ↳ IPC2 availability
- ↳ IPC2 Hardware
- ↳ Linux on IPC2
- ↳ Windows on IPC2
- ↳ Other operating systems on IPC2
- ↳ IPC2 BIOS
- ↳ IPC2 faults and troubleshooting
- ↳ Intense PC and MintBox 2
- ↳ General Intense PC questions
- ↳ Intense PC hardware
- ↳ CPU & Chipset
- ↳ Display interface
- ↳ Memory
- ↳ Storage
- ↳ Ethernet
- ↳ WLAN and miniPCI-e
- ↳ Audio
- ↳ USB
- ↳ Power and heat
- ↳ Linux on Intense PC
- ↳ Linux Mint
- ↳ Other distributions
- ↳ Windows on Intense PC
- ↳ Win7 on Intense PC
- ↳ Win8 on Intense PC
- ↳ Audio
- ↳ Intense PC BIOS
- ↳ Android on Intense PC
- ↳ Intense PC faults and troubleshooting
- ↳ fitlet and MintBox Mini
- ↳ General fitlet questions
- ↳ fitlet performance
- ↳ fitlet hardware
- ↳ Memory
- ↳ Storage
- ↳ Power and heat
- ↳ Mechanical
- ↳ fitlet BIOS
- ↳ Linux on MintBox Mini / Linux on fitlet
- ↳ Windows on fitlet
- ↳ Other operating systems on fitlet
- ↳ FACET Cards
- ↳ fitlet compatible devices
- ↳ Cool stuff with fitlet
- ↳ fitlet faults and troubleshooting
- ↳ fit-PC4
- ↳ General fit-PC4 questions
- ↳ fit-PC4 hardware
- ↳ Windows on fit-PC4
- ↳ Linux on fit-PC4
- ↳ Other operating systems on fit-PC4
- ↳ fit-PC4 BIOS
- ↳ fit-PC4 faults and troubleshooting
- ↳ fit-PC3
- ↳ General fit-PC3 questions
- ↳ fit-PC3 hardware
- ↳ Display interface
- ↳ Storage
- ↳ Audio
- ↳ WLAN and miniPCI-e
- ↳ USB
- ↳ Power and Heat
- ↳ Ethernet
- ↳ Windows on fit-PC3
- ↳ Linux on fit-PC3
- ↳ Other operating systems on fit-PC3
- ↳ fit-PC3 BIOS
- ↳ fit-PC3 accessories
- ↳ Using fit-PC3
- ↳ fit-PC3 faults and troubleshooting
- ↳ fit-PC2
- ↳ General fit-PC2 questions
- ↳ Buying fit-PC2
- ↳ Linux on fit-PC2
- ↳ Linux Mint
- ↳ Ubuntu 9.10
- ↳ Ubuntu 10.04
- ↳ Ubuntu 10.10
- ↳ Ubuntu 11.04
- ↳ Other Linux distributions
- ↳ Ubuntu 8.04
- ↳ Ubuntu 9.04
- ↳ Display driver
- ↳ Multimedia in Linux
- ↳ Multimedia in Mint
- ↳ Windows on fit-PC2
- ↳ Windows 7
- ↳ Windows 7 display driver
- ↳ Audio in Win7
- ↳ Windows XP
- ↳ XP installation
- ↳ Display driver
- ↳ Video playback
- ↳ Audio in XP
- ↳ Other Windows versions
- ↳ Other operating systems on fit-PC2
- ↳ FreeBSD
- ↳ fit-PC2 hardware
- ↳ fit-PC2i hardware
- ↳ Display interface
- ↳ Storage
- ↳ Audio
- ↳ WLAN and miniPCI-e
- ↳ USB
- ↳ Auto-ON
- ↳ Power and Heat
- ↳ Ethernet
- ↳ RTC & System clock
- ↳ fit-PC2 BIOS
- ↳ BIOS updates fit-PC2
- ↳ BIOS updates fit-PC2i
- ↳ fit-PC2 accessories
- ↳ Using fit-PC2
- ↳ HTPC
- ↳ Server
- ↳ Control
- ↳ Verified displays
- ↳ Car PC
- ↳ fit-PC1 questions
- ↳ fit-PC Slim questions
- ↳ uSVR
- ↳ General uSVR questions
- ↳ IPC3
- ↳ General IPC3 questions
- ↳ IPC3 Software
- ↳ IPC3 Hardware
- ↳ FACE modules
- ↳ FACE Modules
- ↳ General FACE Module questions
- Compulab accessories
- ↳ fit-Headless and fit-Headless 4K
- ↳ fit-Uptime
- ↳ fit-statUSB
- ECN/PCN
- ↳ fitlet3 ECN/PCN
- ↳ Tensor-I20 ECN/PCN
- ↳ Tensor-I22 ECN/PCN
- ↳ fitlet2 ECN/PCN
- ↳ Airtop3 ECN/PCN
- ↳ IPC3 ECN
- ↳ fitlet1 ECN
- ↳ IPC2 ECN
- ↳ IPC1 ECN
- ↳ Airtop2 ECN
- ↳ Airtop1 ECN
- ↳ fit-PC4 ECN
- ↳ fit-PC3 ECN
- ↳ fit-PC2 ECN
- ↳ FACE Modules ECN
- ↳ FACET Cards ECN
- Wish list
- ↳ Addressed requests