fit-PC Users Forum
https://fit-pc.com/forum/

Memory support?
https://fit-pc.com/forum/viewtopic.php?f=125&t=5377
Page 1 of 1

Author:  Yo! [ Wed Jun 11, 2014 5:25 pm ]
Post subject:  Memory support?

Hi, I've recently order a fit-PC4 Pro Barebone and am having some memory compatibility issues.

1) Does fit-pc4 support Kingston HyperX memory (http://www.kingston.com/dataSheets/KHX16LS9P1K2_8.pdf), will the memory work with these parameters 1600 CL9-9-9?
Or have to buy ValueRAM memory (http://www.kingston.com/dataSheets/KVR16LS11_8.pdf)?

2) Since the memory in fit-pc4 works in single channel mode, which option is preferable 2x4Gb or 1х8Gb (as will be faster, more reliable, etc..) ?

P.S. Sorry for my bad English.

Author:  mbirger [ Mon Jun 16, 2014 1:17 pm ]
Post subject:  Re: Memory support?

1. In terms of latency, I see no conflict with AMD platform requirements.
Any 204 pin SO-DIMM 64 bit (without parity byte) should be OK.
Max performance could be reached using SO-DIMM supporting 1,600 MT/s.

2. In single channel mode similar performance will be for 2x 4GB (1DPC) and 1x 8GB (2DPC), with slight tendency for higher rates at 1DPC.
So decision factors are:
a) Max supported rate (not all SO-DIMMs supports 1,600 MT/s)
b) Cost of the SO-DIMM

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/