Difference between revisions of "IPC3 BIOS Update"

From fit-PC wiki
Jump to: navigation, search
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
[https://twitter.com/IotFit Follow us on Twitter for software and BIOS updates]
 +
 
== BIOS update procedure ==
 
== BIOS update procedure ==
# Download the latest from [[IPC3 BIOS files]].
 
# Copy archive content to USB Flash formatted FAT32.
 
# Disconnect all storage from IPC3 (SATA/USB).
 
# Plug USB Flash into IPC3 and power on.
 
# Press F7 key for BIOS boot menu, choose "Build-in EFI Shell" option.
 
# Switch to file system of USB Flash by fs0: command.
 
# Run update.nsh. If the BIOS version is IPC3K.XYN.0.25.0 follow [[IPC3 BIOS recovery procedure]].
 
# After the update IPC3 will reboot automatically.
 
  
 +
# Download the latest release from [[IPC3 BIOS files]].
 +
# Copy the archive contents to a USB flash drive formatted FAT32.
 +
# Plug the USB flash drive into IPC3 and power on.
 +
# Press the F7 key during boot to show the "select boot device" menu.
 +
# Choose the "Built-in EFI Shell" option.
 +
# Wait for the utility to load and follow the on screen instructions.
  
 
[[category:IPC3]]
 
[[category:IPC3]]
 
[[Category:BIOS]]
 
[[Category:BIOS]]
 +
[[Category:Software]]

Latest revision as of 14:57, 1 November 2018

Follow us on Twitter for software and BIOS updates

BIOS update procedure

  1. Download the latest release from IPC3 BIOS files.
  2. Copy the archive contents to a USB flash drive formatted FAT32.
  3. Plug the USB flash drive into IPC3 and power on.
  4. Press the F7 key during boot to show the "select boot device" menu.
  5. Choose the "Built-in EFI Shell" option.
  6. Wait for the utility to load and follow the on screen instructions.